Who Builds Your Automatic Perfume Filling Machine?
We build most of our core machines in our own factory. Which steps are automatic and what is tested before shipment is written into your quotation.
Hand-crimping slows a perfume line as much as hand-filling. An automatic perfume filling machine fills, crimps and presses in one pass: 30 to 50 bottles a minute on the linear line, or 1,000 to 1,200 an hour on the rotary.
Request a Quote

On a linear perfume line, bottles ride a conveyor under vacuum filling heads, then through a dual-lane crimping station and an automatic pressing station. A return cylinder sends excess liquid back, and the filling heads are stainless steel.
The rotary filler works on a turntable with four filling heads and automatic crimping, then presses the collar or screws the cap. Bottles are loaded by hand on the rotary model, so it is automatic in the filling step but not in the loading step.
Discuss Your ApplicationWeigh these before you step up from a semi-automatic filler.
We build most of our core machines in our own factory. Which steps are automatic and what is tested before shipment is written into your quotation.
One machine fills, crimps and presses. You save the hand-crimping step and one handling pass.
The linear line crimps in two lanes, so crimping keeps pace with filling.
Excess liquid returns to the tank instead of dripping on the line, which saves product.
Send bottles per hour and your crimp size. We say whether a rotary filler or a linear line fits.
The linear line and the rotary filler side by side. Options and utilities are stated in your quotation.
Two automatic machines.
| Parameter | Linear Line | Rotary Filler |
|---|---|---|
| Filling | Vacuum filling, stainless heads | Four heads on a turntable |
| Speed | 30–50 bottles/min at 100 mL | 1,000–1,200 bottles/h |
| Crimp range | Cap diameter 15–22 mm (custom) | 13, 15, 17, 19 or 22 mm |
| Fill volume | To your bottle | 10–500 mL |
| Fill error | Confirmed per bottle | ≤ ±1% |
| Power | 220 V; air 0.5–0.7 MPa | 220 V / 50 Hz; weight about 600 kg |
| Size | Quoted with the line layout | 1200 × 1000 × 1700 mm |
The closure decides the crimp and press station.
| Parameter | What We Check |
|---|---|
| Shape | Round, square and special-shaped bottles. Odd shapes need molds on the rotary filler. |
| Crimp | The neck and the pump collar must match a crimp head size. |
| Material | Both glass and plastic bottles work. |
| Pump | Send the pump so we can check its press height. |
A line needs floor plan and utilities.
| Parameter | What We Check |
|---|---|
| Layout | The line is long. Draw it on your floor plan with the infeed and the exit. |
| Electrical | Both machines run on 220 V. Tell us your supply. |
| Air | The linear line needs 0.5–0.7 MPa of compressed air. |
| Ventilation | Alcohol vapor needs extraction at the filling point. |
Test the whole sequence, not only the fill.
| Parameter | What We Check |
|---|---|
| Level | Compare the liquid level across a batch. |
| Crimp | Check the tightness, then run a pull test or a leak test. |
| Press | Check pump height and straightness. |
| Run | Agree a continuous run and an acceptable number of stops. |
The slowest station sets the output.
| Parameter | What We Check |
|---|---|
| Line speed | 30–50 bottles a minute at 100 mL. Larger fills run slower. |
| Rotary | About 1,000–1,200 bottles an hour with hand loading. |
| Changeover | Time to switch bottle size, crimp head and guides. |
What each machine automates.
| This EquipmentLinear Line | Rotary Filler | Four-Head Vacuum Filler | Hand Filling | |
|---|---|---|---|---|
| Fills | Yes | Yes | Yes | By hand |
| Crimps | Yes, dual lane | Yes | No | By hand |
| Bottle loading | Conveyor | By hand | By hand | By hand |
| Speed | 30–50/min at 100 mL | 1,000–1,200/h | 40–60/min | Slow |
| Check first | Floor plan | Crimp and mold | Bottle height | Consistency |
Four places automatic filling pays off.

A conveyor feeds filling heads, a dual-lane crimper and a press. Send your bottle and crimp size.
Discuss This Application
Four heads fill, then a crimp head seals. Odd bottle shapes can use custom molds.
Discuss This Application
If your volume is lower, a four-head vacuum filler plus a pneumatic crimper may be enough.
Discuss This Application
Crimp heads come for 13, 15, 17, 19 and 22 mm. Match one to your neck.
Discuss This ApplicationWhat can go wrong when you choose a perfume line too fast.
Write the test method, the pass criteria and what ships with the machine into the quotation.
Discuss Acceptance CriteriaWith these details we can say which automatic machine fits.
Have another material or format?
Share your requirements.
Send your bottle, pump and bottles per hour.
We recommend the linear line or the rotary filler.
Agree a sample run with fill, crimp and press checks.
Review the price, the automatic perfume filling machine configuration and terms.
Run the checks you agreed on the automatic perfume filling machine, then pack and ship.
No. Bottles are loaded by hand on the rotary model. The filling, crimping and pressing are automatic.
The rotary filler takes crimp diameters of 13, 15, 17, 19 and 22 mm. The linear line covers 15–22 mm and can be customized.
The 30–50 bottles a minute figure is for 100 mL. Other sizes change the speed. Tell us your bottles.
Not with these machines, because they crimp. With a four-head vacuum filler you do.
Yes, the rotary filler uses molds for odd shapes. Send a sample bottle.
Tell us the bottle and the pump first. Add the rest when you have it.
Send the bottle, pump and bottles per hour. We reply with the machine we recommend.
Get a Quote