Who Builds Your Heat Shrink Tunnel?
Most of our core machines come out of our own factory. We take responsibility for build quality and delivery under the agreed order terms.
Uneven shrink leaves loose corners and burn marks. Our shrink tunnel machine runs packs up to 500 by 300 mm through controlled hot air, with constant-temperature heating and electronic speed control.
Request a QuoteView Photos

A heat shrink tunnel carries wrapped packs through a chamber of hot air on a conveyor. The film shrinks and conforms to the product. Temperature, blower speed and conveyor speed are the three controls that decide the result.
Our standard tunnel has constant-temperature heating and electronic speed control, an opening of 1740 × 500 × 300 mm, a blower at 2,800 rpm and a rating of 30–100 packs a minute. It handles PVC and POF film. Tunnels vary by model, so we confirm the one that matches your pack.
Discuss Your ApplicationThese four points decide whether the tunnel fits.
Most of our core machines come out of our own factory. We take responsibility for build quality and delivery under the agreed order terms.
The tunnel opening limits pack height and width. The standard tunnel takes packs up to 500 mm wide and 300 mm high.
Electronic speed control lets you match the conveyor speed to your film.
At 18.5 kW the tunnel needs a proper supply. Check your breaker and cable before delivery.
Send a pack, a film and your rate. We confirm the tunnel model.
The standard tunnel. Other models are confirmed per order.
One standard model.
| Parameter | Standard Tunnel |
|---|---|
| Voltage | 380 V / 50 Hz |
| Power | 18.5 kW |
| Tunnel opening (L × W × H) | 1740 × 500 × 300 mm |
| Largest pack | 500 × 300 mm |
| Blower speed | 2,800 rpm |
| Capacity | 30–100 packs/min |
| Machine size | 2150 × 710 × 1420 mm |
| Film | PVC, POF |
Pack and film decide the settings.
| Parameter | What We Check |
|---|---|
| Size | The pack must fit within 500 × 300 mm. |
| Film | PVC and POF need different settings. |
| Contents | Heat-sensitive goods need a lower setting. |
| Rate | Conveyor speed and tunnel length set the rate. |
A big power user.
| Parameter | What We Check |
|---|---|
| Power | 380 V, 18.5 kW. Check the breaker and the cable. |
| Space | The tunnel is about 2.15 × 0.71 m. |
| Ventilation | Hot air and film fumes need extraction. |
| Link | Match the tunnel conveyor height to the sealer. |
Judge the finished pack.
| Parameter | What We Check |
|---|---|
| Tightness | Film sits tight with no loose corners. |
| Heat | Look for burn marks. |
| Evenness | Shrink is even all round. |
| Pack | The contents should not deform. |
Speed and temperature trade off.
| Parameter | What We Check |
|---|---|
| Rate | Rated up to 30–100 packs a minute. Your pack decides the real rate. |
| Settings | A slower conveyor allows a lower temperature. |
| Spacing | Space the packs evenly on the conveyor for an even shrink. |
A tunnel next to the L-bar sealer, the full set and a heat gun.
| This EquipmentHeat Shrink Tunnel | L-Bar Sealer | Full Shrink Set | Heat Gun | |
|---|---|---|---|---|
| What it does | Shrinks film with hot air | Wraps and seals film | Wraps, seals and shrinks | Shrinks by hand |
| Power | 380 V, 18.5 kW | 220 V, 2.1 kW | Both | Small |
| Best for | Steady shrinking | Sealing | Complete wrapping | Samples |
| Check first | Opening size | Seal frame | Layout | Consistency |
Four things to plan for a tunnel.

Packs up to 500 × 300 mm ride through the hot air on the conveyor.
Discuss This Application
Sleeves leave the L-bar sealer and go straight into the tunnel.
Discuss This Application
Several products can share one film sleeve. Check that the bundle fits the opening.
Discuss This Application
Machines ship in wooden crates sized for the model.
Discuss This ApplicationWhat buyers ask before they order a shrink tunnel.
Write the test method, the pass criteria and what ships with the machine into the quotation.
Discuss Acceptance CriteriaWith these details we confirm the tunnel model.
Have another material or format?
Share your requirements.
Send a pack, a film and packs per hour.
We confirm the tunnel model for your pack.
Agree a shrink test on your pack.
Review the price, the heat shrink tunnel configuration and terms.
Run the checks you agreed on the heat shrink tunnel, then crate and ship.
Tunnels vary in opening, power and speed. We confirm the model against your pack rather than assume one fits all.
Yes. The tunnel is rated for both, and each needs its own temperature and speed.
The standard tunnel is 380 V, 18.5 kW.
Packs up to 500 × 300 mm in the standard tunnel.
Yes, if you already wrap your packs in film by another method.
Tell us the pack and the film first. Add the rest when you have it.
Send a sample pack and the film. We confirm the tunnel model that fits.
Get a Quote