Labeling
Machines

A crooked or wrinkled label is the first thing a buyer sees. Our labeling machines place labels to 1 mm on a conveyor, or to 0.5 mm on the bench, from 20 to 120 labels a minute.

Request a QuoteView Photos
20–120/minAcross the range
±0.5–1 mmLabel placement
5 modelsAutomatic and semi-automatic
Automatic round-bottle labeling machine with a conveyor and touch screen
Send the ContainerShape decides the labeler
Automatic flat-surface labeling machine with a conveyor and touch screen

Labeling Machines for Bottles, Jars and Flat Packs

A labeler peels a label from its backing and presses it onto the container in the right place. Which machine fits depends on the shape: round bottles take a wrap-around labeler, flat packs a top-and-bottom machine, and square or flat bottles a double-sided one.

Our automatic labelers run on a conveyor with sensors that find each product. The semi-automatic ones sit on a bench and you place each item. Automatic machines place labels to ±1 mm and semi-automatic machines to ±0.5 mm.

Discuss Your Application

Equipment and Process Examples

  • 10,000+Machines Shipped
  • 6hQuote Reply
  • 1 UnitMinimum Order

Will It Work With Your Product?

Send a sample, a container or a photo of what you make. We reply with the machine we would look at first, and what we still need to confirm.

Request a Quote
Flat pouch with a white label on a conveyor beside the label roll and pressure roller

What to Look for in a Labeling Machine

These four points decide which labeler fits.

Who Builds Your Labeling Machine?

We make most of our core machines in our own factory, so questions about this model go to the company that builds and ships it.

Container Shape First

Round, flat and square containers use different labeling methods. Send the real container.

Label Size Range

Each machine lists a label length and backing width range. Check your label against it.

Placement Accuracy

Automatic models state ±1 mm and semi-automatic ±0.5 mm. Decide what your design tolerates.

Tell Us Your Container and Label

Send a container, a label roll and your labels per hour. We recommend a machine.

Labeling Machine Specifications

Five labelers side by side. Voltage, air and options are stated in your quotation.

Five Labelers Compared

Pick by shape and speed.

  • Auto flat: 40–120/min
  • Auto round: 40–70/min
  • Auto double-sided: 30–120/min
  • Semi-auto: 20–35/min
Get a Quote
ParameterAuto FlatAuto RoundAuto Double-SidedSemi FlatSemi Round
Speed40–120/min40–70/min30–120/min20–30/min20–35/min
Placement±1 mmTo your label±1 mm±0.5 mm±0.5 mm
ContainerFlat items, L 40–400 mmRound, dia 25–300 mmFlat, round and square, dia 20–120 mmFlat and curved, L 20–200 mmRound, dia 10–160 mm, up to 250 mm tall
Power220 V / 50 Hz, 2 kW0.4–0.6 MPa220 V / 50 HzQuoted per orderQuoted per order
Size (mm)1900 × 830 × 13501950 × 1200 × 1530Quoted per order920 × 470 × 500920 × 470 × 500

Which Labeling Machine Fits Your Container?

Compare the labeler types by shape, speed and feeding.

This EquipmentAutomatic LabelerSemi-Automatic LabelerHand LabelingUV DTF Transfer
Speed30–120/min20–35/minSlowPrinted on demand
FeedingConveyorBy handBy handBy hand
Best forSteady linesSmall batchesSamplesCrystal and foil labels
Label typeRoll labelsRoll labelsSheet or rollPrinted transfer
Check firstContainer shapeLabel sizeConsistencySurface

Labeling Applications

Where our labeling machines earn their place, and what to settle first.

View Selection Criteria
Automatic round-bottle labeling machine with a conveyor and touch screen

Wrap Labels Around Round Bottles

The automatic round labeler fits diameters of 25–300 mm and can apply single or double labels.

Discuss This Application

Labeling Problems and What Decides Them

What buyers ask about labelers before they order.

Skewed Labels
Bottle wobble causes skew. Guides and a centered bottle fix it.
Bubbles and Wrinkles
Press-on pressure and label stiffness decide the finish. Test your label.
Tapered Containers
Tapered bottles skew labels. Tell us the taper.
Roll Changes
Small rolls stop the line often. Use large rolls.
Wet or Waxy Surfaces
Residue stops adhesion. Clean the surface before labeling.

What to Check in a Sample Test

  1. PositionMeasure offset on 50 pieces.
  2. FinishLook for bubbles and wrinkles.
  3. Edge HoldCheck edges after 24 hours.
  4. RunRun 15 minutes and count stops.

Agree the Labeling Test Before You Order

Write the test method, the placement tolerance and what ships with the machine into the quotation.

Discuss Acceptance Criteria
Sample ReviewYour container and label
Label TestPosition, finish and speed
What Ships With ItManual, wiring diagram, spare list

What to Send Before We Quote

With these details we can recommend a labeler.

About Your Container and Label

  • MaterialsContainer and label
  • ProcessApplying roll labels
  • Label DetailsContainer shape, label size and rate

Containers and Labels to Send

  • Container SetEach shape you label
  • Label RollReal roll or sample
  • Label DrawingPosition on the container
  • Backing WidthAnd roll diameter
  • Photos of Your Labeling LineYour current labeling
  • Output GoalLabels per hour

About Your Line and Space

  • Supply voltage and compressed air
  • Space and conveyor height
  • Link to the capper

Have another material or format?
Share your requirements.

Discuss Your Setup

How to Order a Labeling Machine

  1. 1Share Details

    Send a container, a label and labels per hour.

  2. 2Choose the Model

    We recommend an automatic or semi-automatic labeler.

  3. 3Agree the Test

    Agree a labeling test and placement tolerance.

  4. 4Confirm the Order

    Review the price, the labeling machine configuration and terms.

  5. 5Check and Ship

    Run the checks you agreed on the labeling machine, then pack and ship.

Labeling Machines FAQs

Answers to questions the specs do not cover.

Request a Quote
How do I choose between automatic and semi-automatic?

Automatic labelers run on a conveyor at 30–120 a minute. Semi-automatic ones are hand-placed at 20–35 a minute. Pick automatic once labeling is a bottleneck or you need steady output.

Can one labeler do bottles and boxes?

Round bottles and flat packs use different methods, so usually not. The double-sided machine covers flat, round and square bottles.

What accuracy can I expect?

Automatic machines place labels to ±1 mm and semi-automatic ones to ±0.5 mm. Tell us what your label design tolerates.

Do you supply the labels?

No. We build machines only. You supply the label rolls.

Can I print crystal labels?

Yes, with a UV DTF printer. See the UV DTF page.

Request a Quote for Labeling Machines

Tell us the container and the label first. Add the rest when you have it.

  • Container sample or drawing
  • Label size and roll details
  • Labels per hour
  • Supply voltage and air
  • Delivery country

Request a Quote for Your Labeling Machine

Sending opens an email draft in your mail app. Nothing is sent until you send that email. See our Privacy Policy.

Have photos or drawings? Send them on WhatsApp: +86 13590158756

Send Us a Container and a Label

Send a container and a label roll with your target rate. We reply with the labeler we recommend.

Get a Quote
Automatic double-sided labeling machine with a conveyor