Who Builds Your Small Bottle Filling Machine?
We make most of our core machines in our own factory. Build quality and delivery are our responsibility under the order terms.
Vials with a 6 mm neck defeat most fillers. Our small bottle filling machines enter necks from 6 mm and dose from 1 g, with a single-head filler, an oil line and a four-head vacuum filler to choose from.
Request a QuoteView Photos

Small bottles bring two problems: a narrow neck for the head to enter, and a small dose that needs to be accurate. We cover these with three machines, each for a different size range.
The single-head pneumatic filler enters necks of 6 to 25 mm. The oil line doses 1 to 20 g on a conveyor with ±1% accuracy. The four-head vacuum filler starts at bottles 7 mm across and goes up to 100 mm.
Discuss Your ApplicationThese four points decide which filler fits your vial.
We make most of our core machines in our own factory. Build quality and delivery are our responsibility under the order terms.
The head must enter without touching the edge. Measure the inside diameter of the neck.
Below 10 mL the dose is small enough that ±1% matters. Choose a filler rated for it.
Small bottles tip easily. Guides or a conveyor keep them upright.
Send a vial, its fill volume and the liquid. We say which filler fits.
Three fillers side by side. Voltage, air and options are stated in your quotation.
Choose by neck width and dose.
| Parameter | Single-Head | Oil Line | 4-Head Vacuum |
|---|---|---|---|
| Fill amount | 10–300 mL | 1–20 g | 10–500 mL |
| Bottle size | Neck 6–25 mm; height 50–200 mm | Customizable | Diameter 7–100 mm; height 50–300 mm |
| Speed | 10–25 bottles/min | 20–40 fills/min | 40–60 bottles/min |
| Accuracy | Level fill | ±1% | Level fill |
| Power | Air 0.4–0.6 MPa | Electric; confirmed per order | 220 V / 50 Hz, 0.2 kW |
Measure the real part.
| Parameter | What We Check |
|---|---|
| Neck | Measure the inside diameter, not the outside. The head must clear it. |
| Height | Single-head takes 50–200 mm; vacuum 50–300 mm. |
| Base | Round, flat and tapered bases stand differently. |
| Material | Glass or plastic. Light plastic vials can move under suction. |
Small machines, small footprint.
| Parameter | What We Check |
|---|---|
| Space | The single-head is about 230 × 390 mm, the vacuum filler about 750 × 600 mm and the oil line about 1.06 × 1.06 m. |
| Utilities | The single-head runs on compressed air. The vacuum filler needs 220 V. |
| Vapor | Put extraction at the filling point. |
Weigh and look.
| Parameter | What We Check |
|---|---|
| Weight | Weigh a run of fills and compare with the target. |
| Level | Compare the liquid level across a batch. |
| Drips | Check the neck and the outside of the vial. |
| Stability | Run the line and watch for tipping. |
Vials move fast; handling does not.
| Parameter | What We Check |
|---|---|
| Fill rate | The single-head fills 10–25 a minute, the oil line 20–40 and the vacuum filler 40–60. |
| Handling | Hand loading small vials is slow; a conveyor or an unscrambler (on request) helps. |
| Next steps | Capping and labeling decide the real line speed, so plan them together. |
The three fillers by neck width and automation, next to a hand pipette.
| This EquipmentSingle-Head Filler | Oil Filling Line | Four-Head Vacuum Filler | Hand Pipette | |
|---|---|---|---|---|
| Narrowest neck | 6 mm | Customizable | 7 mm | Any |
| Feeding | By hand | Conveyor | By hand | By hand |
| Dose | 10–300 mL | 1–20 g | 10–500 mL | Any |
| Best for | Narrow necks, small runs | Tiny doses, steady flow | Several bottles at once | Samples |
| Check first | Neck width | Liquid viscosity | Bottle height | Consistency |
Four small bottle filling jobs.

The single-head filler enters necks from 6 mm. Measure the inside diameter before you order.
Discuss This Application
The oil line runs on a conveyor at 20–40 fills a minute with ±1% accuracy.
Discuss This Application
The vacuum filler fills bottles 7–100 mm across, four at a time.
Discuss This Application
A rotary unscrambler, available on request, lines up bottles 15–100 mm across at up to 150 a minute.
Discuss This ApplicationWhat small-bottle fillers ask about before buying.
Write the test method, the pass criteria and what ships with the machine into the quotation.
Discuss Acceptance CriteriaWith these details we can say which filler fits your vial.
Have another material or format?
Share your requirements.
Send a vial, your liquid and vials per hour.
We recommend the single-head, oil line or vacuum filler.
Agree a fill and weighing test.
Review the price, the small bottle filling machine configuration and terms.
Run the checks you agreed on the small bottle filling machine, then pack and ship.
The single-head filler takes necks from 6 mm. Send a vial and we confirm.
We fill vials with the machines listed here. We do not list sterile pharmaceutical vial lines.
The oil line states ±1% for 1–20 g. Weigh a run to check against your tolerance.
Within its range, yes. You change the guides or heads for each size.
Yes, as a separate machine. We have benchtop and automatic cappers.
Tell us the vial and the liquid first. Add the rest when you have it.
