Who Builds Your Round Bottle Labeling Machine?
Our own factory makes most of our core machines, and the company that sells you this labeler is the one that builds and ships it.
A wrap-around label a few millimeters short leaves a gap on every bottle. Our round bottle labeling machines wrap bottles 10 to 300 mm across, automatic at 40 to 70 a minute or on the bench at 20 to 35.
Request a QuoteView Photos

A wrap-around labeler rolls the bottle against a label so the label wraps once around the body. The result depends on getting the label length right: it must equal the circumference you want covered, plus a small overlap if the ends meet.
The automatic model handles bottles from 25 to 300 mm across and applies a single label or two labels, with a label range made to your sample. The bench model takes bottles from 10 to 160 mm across, up to 250 mm tall, and labels from 20 to 380 mm long.
Discuss Your ApplicationThese four points decide which labeler fits your bottle.
Our own factory makes most of our core machines, and the company that sells you this labeler is the one that builds and ships it.
Circumference is π times the diameter. A 60 mm bottle is about 188 mm around; the label must match what you want covered.
Both models can place one label or two on the same bottle, for example a front and a back label.
Straight bodies label best. Tapered bodies need a tilt or a different method, so send the bottle.
Send a bottle and the label. We check the wrap length and the fit.
The automatic and bench round labelers side by side.
Pick by volume and bottle size.
| Parameter | Automatic Round Labeler | Bench Round Labeler |
|---|---|---|
| Bottle diameter | 25–300 mm | 10–160 mm |
| Bottle height | To your bottle | Up to 250 mm |
| Speed | 40–70 per min | 20–35 per min |
| Label size | 20–290 mm, to your sample | L 20–380 mm, W 20–220 mm |
| Labels per bottle | Single or double | Single or double |
| Power | Air 0.4–0.6 MPa | Quoted per order |
| Size | 1950 × 1200 × 1530 mm | About 920 × 470 × 500 mm; 45 kg |
Wrap length is the key figure.
| Parameter | What We Check |
|---|---|
| Diameter | Measure at the label position, not the widest point. |
| Length | Compare label length with the circumference you want covered. |
| Overlap | State the overlap or gap you want at the seam. |
| Height | The label panel must be straight for a clean wrap. |
Plan the line.
| Parameter | What We Check |
|---|---|
| Space | Automatic: about 1.95 × 1.2 m. Bench: about 0.92 × 0.47 m. |
| Air | The automatic model needs 0.4–0.6 MPa of compressed air. |
| Height | Match the labeler to your conveyor height. |
Look at the seam and the straightness.
| Parameter | What We Check |
|---|---|
| Seam | Measure overlap or gap across 50 bottles. |
| Straight | Check that the label is level all the way round. |
| Bubbles | Look for air under the label. |
| Hold | Check the label edges after a day. |
Keep pace with capping.
| Parameter | What We Check |
|---|---|
| Speed | The automatic model runs 40–70 a minute and the bench model 20–35. |
| Rolls | Larger rolls mean fewer stops. |
| Changeover | A new bottle diameter means new guides. |
The two round labelers next to a double-sided machine and hand labeling.
| This EquipmentAutomatic Round Labeler | Bench Round Labeler | Double-Sided Labeler | Hand Labeling | |
|---|---|---|---|---|
| Feeding | Conveyor | By hand | Conveyor | By hand |
| Speed | 40–70/min | 20–35/min | 30–120/min | Slow |
| Best for | Steady lines | Small runs | Flat and square bottles | Samples |
| Check first | Diameter and label length | Label size | Face width | Consistency |
Four round bottle labeling jobs.

Single or double labels at 40–70 a minute.
Discuss This Application
Items 10–160 mm across and up to 250 mm tall, at 20–35 a minute.
Discuss This Application
Round jars take wrap labels. Printed transfer labels suit lids; see UV DTF.
Discuss This Application
Run the labeler after capping on the same conveyor.
Discuss This ApplicationWhat buyers ask before they order a round bottle labeler.
Write the test method, the seam tolerance and what ships with the machine into the quotation.
Discuss Acceptance CriteriaWith these details we can check the wrap length and the fit.
Have another material or format?
Share your requirements.
Send a bottle, a label and bottles per hour.
We pick the automatic or the bench round labeler.
Agree a wrap test with seam checks.
Review the price, the round bottle labeling machine configuration and terms.
Run the checks you agreed on the round bottle labeling machine, then pack and ship.
Circumference is π times the diameter at the label position. Add a small overlap if the ends should meet, or leave a gap if you want one.
Within its range, yes. You change the guides for each diameter.
Straight bodies work best. Send a tapered bottle so we test it.
Both models can apply single or double labels.
Power and air for the bench model are stated in the quotation.
Tell us the bottle and the label first. Add the rest when you have it.
Send a bottle and a label. We check the wrap and reply with the labeler we recommend.
Get a Quote