Who Builds Your Automatic Shrink Wrapping Machine?
We build most of our core machines in our own factory. Which steps are automatic and what is tested before shipment is written into your quotation.
In a basic shrink set, someone carries every pack from sealer to tunnel. An automatic shrink wrapping machine line links them by conveyor, so packs enter the tunnel evenly. Quoted per project.
Request a QuoteView Photos

In a basic shrink set, someone loads the product into the sealer by hand and moves it to the tunnel. In an automatic shrink line, the sealer feeds the tunnel over a conveyor, so the operator only loads products and watches.
The machines in the standard set are the L-bar sealer (220 V, 2.1 kW) and a heat tunnel (380 V, 15–18.5 kW). The tunnel is rated at 30 to 100 packs a minute. Infeed conveyors, product spacing and counters are added per project, so we confirm what your line needs.
Discuss Your ApplicationWeigh these before you automate.
We build most of our core machines in our own factory. Which steps are automatic and what is tested before shipment is written into your quotation.
Packs move from sealer to tunnel by belt, so the tunnel stays full at a steady pace.
Even spacing means even shrink. Hand loading bunches packs.
A linked line removes the carrying between the sealer and the tunnel, so operators only load products and watch.
Send your packs per hour and pack size. We say if a basic set or a line fits.
The standard sealer and tunnel set. Line options are quoted per project.
Compare the setups.
| Task | Basic Set | Linked Line |
|---|---|---|
| Load product | By hand | By hand or infeed |
| Seal film | By hand at the sealer | In line |
| Move to tunnel | By hand | Conveyor |
| Shrink | Tunnel conveyor | Tunnel conveyor |
| Unload | By hand | Exit conveyor |
The two machines in the set.
| Parameter | L-Bar Sealer | Heat Tunnel |
|---|---|---|
| Voltage | 220 V / 50 Hz | 380 V / 50 Hz |
| Power | 2.1 kW | 15–18.5 kW |
| Size (mm) | 1740 × 1020 × 1460 | 2150 × 710 × 1420 |
| Film | POF, PVC | PVC, POF |
| Rate | Confirmed per pack | Rated up to 30–100 packs/min |
A linked line is long.
| Parameter | What We Check |
|---|---|
| Length | Sealer, conveyor and tunnel together are about 5 m long. |
| Power | The tunnel runs on 380 V. |
| Ventilation | Hot air and film fumes need extraction. |
| Flow | Plan the infeed and the exit on your floor. |
| Parameter | What We Check |
|---|---|
| Spacing | Packs enter the tunnel evenly. |
| Seal | Seals are closed and straight. |
| Shrink | Film is tight and unscorched. |
| Run | Agree a run length and an acceptable number of stops. |
The slowest step sets the rate.
| Parameter | What We Check |
|---|---|
| Rate | The tunnel is rated at 30–100 packs a minute. Your pack decides the real rate. |
| Loading | The infeed rate matters as much as the tunnel speed. |
| Film | Plan time for film roll changes. |
A linked line next to a basic set, a flow wrapper and hand wrapping.
| This EquipmentLinked Shrink Line | Basic Shrink Set | Flow Wrapper | Hand Wrapping | |
|---|---|---|---|---|
| Handling | Conveyor between machines | By hand | Conveyor | By hand |
| Operators | Fewer | More | One | Many |
| Best for | Steady volume | Short runs | Single items | Samples |
| Check first | Floor length | Pace of hand feeding | Product height | Speed |
Four things to plan for a linked line.

A conveyor keeps the tunnel evenly loaded, so every carton gets the same shrink.
Discuss This Application
Even spacing gives an even shrink. Bunched packs do not.
Discuss This Application
Machines ship in wooden crates. Check your door and forklift access.
Discuss This Application
A flat labeler can follow the tunnel.
Discuss This ApplicationWhat can go wrong when you add automation.
Write the test method, the pass criteria and what ships with the line into the quotation.
Discuss Acceptance CriteriaWith these details we can say what a line would include.
Have another material or format?
Share your requirements.
Send a pack, a film and packs per hour.
We say what a linked line would include.
Agree a run test on your pack.
Review the price, the automatic shrink wrapping machine configuration and terms.
Run the checks you agreed on the automatic shrink wrapping machine, then crate and ship.
The standard set is an L-bar sealer plus a tunnel. A conveyor-linked line is added per project; send your pack and rate.
The tunnel is rated at 30–100 packs a minute. Your pack and film decide the real rate, and we confirm it with a sample.
It spaces packs evenly so the tunnel shrinks them evenly.
In the standard set, yes. A linked line reduces hand handling.
Machines ship in wooden crates sized for the model.
Tell us the pack and the rate first. Add the rest when you have it.
Send your pack and packs per hour. We reply with the setup we recommend.
Get a Quote