Induction Sealing
Machines

A bottle with no liner can leak in transit. Our induction sealing machine bonds a foil liner under the cap, at 20 to 40 bottles a minute, on caps from 15 to 120 mm across.

Request a Quote
20–40/minBottles per minute
15–120 mmSeal diameter, two ranges
1,800 WPower, 220 V
Air-cooled continuous induction sealing machine with a conveyor
Foil Liner RequiredSend cap and liner
Air-cooled continuous induction sealing machine with a conveyor

Induction Sealing Machines for Foil-Lined Caps

A foil-lined cap holds a disc with an aluminum layer. As the capped bottle passes under an induction head, an alternating magnetic field heats the foil, which melts a coating and bonds it to the bottle rim. The cap stays on; the seal is under it.

The machine is air-cooled and works continuously on a conveyor, with automatic detection. It seals caps from 15 to 60 mm and from 50 to 120 mm across at 20–40 bottles a minute. It is 900 × 440 × 500 mm and uses 220 V at 1,800 W.

Discuss Your Application

What to Look for in an Induction Sealer

These four points decide whether it fits your cap.

Who Builds Your Induction Sealing Machine?

We build most of our core machines ourselves, in our own factory. Who builds, checks and ships your machine is written into the order terms.

Two Diameter Ranges

Small caps of 15–60 mm and large caps of 50–120 mm are both covered. Check which your cap is.

Air Cooling

Air cooling needs no water. Plan clearance around the head.

Automatic Detection

The machine detects each bottle and seals only when one is present.

Tell Us Your Cap and Liner

Send a cap with its liner and the bottle. We check the seal.

Induction Sealing Machine Specifications

The continuous sealer at a glance. Options and spare parts are listed in your quotation.

Continuous Induction Sealer at a Glance

One continuous model.

  • 220 V, 1,800 W
  • Air-cooled
  • 20–40 bottles/min
  • Seal diameter 15–60 / 50–120 mm
Get a Quote
ParameterInduction Sealer
Voltage220 V
Power1,800 W
CoolingAir-cooled
Seal diameter15–60 mm and 50–120 mm
Efficiency20–40 bottles/min
Size (L × W × H)900 × 440 × 500 mm
OperationConveyor, automatic detection

Induction Sealing or Another Closure Seal?

Induction sealing next to other ways to seal.

This EquipmentInduction SealerHeat-Seal PlateL-Bar SealerCap Only
SealsFoil liner to the rimFilm or bagFilm sleeveNothing
Power220 V, 1.8 kW0–300 °C plate220 V, 2.1 kWNone
Best forTamper-evident bottlesSmall bagsBoxesSimple bottles
Check firstCap and linerFilmPack sizeLeak risk

Induction Sealing Applications

Four induction sealing jobs.

View Selection Criteria

Induction Sealing Problems and What Decides Them

What buyers ask before they order an induction sealer.

Weak Bond
The liner coating has to match the bottle neck material. Test your own cap and bottle.
Foil Burn
Too much sealing power burns the liner. Test your own liner.
Loose Caps
A loose cap leaves a gap above the rim. Cap first, then seal.
Cap Size Changes
Each cap size needs the head height adjusted.
Metal Caps
Metal caps heat up in the magnetic field. Tell us the cap material.

What to Check in a Sample Test

  1. BondPeel 20 liners and check the sealed ring.
  2. LeaksTurn 20 bottles upside down and squeeze them.
  3. BurnLook for burn marks on the liners.
  4. RunRun for 15 minutes and count the stops.

Agree the Seal Test Before You Order

Write the test method, the pass criteria and what ships with the machine into the quotation.

Discuss Acceptance Criteria
Sample RunYour cap and liner
Pack TestBond and leaks
What Ships With ItManual, wiring diagram

What to Send Before We Quote

With these details we can check the seal.

About Your Product and Film

  • MaterialsCap, liner and bottle
  • ProcessInduction sealing
  • Pack DetailsCap diameter, liner and rate

Packs and Film to Send

  • Cap SampleWith the liner inside
  • Bottle SampleWith the neck finish
  • Liner SpecCoating type
  • Peel TargetIf known
  • Photos of Your Packing AreaYour line
  • Output GoalBottles per minute

About Your Power and Floor

  • 220 V supply
  • Conveyor space and height
  • Clearance for cooling

Have another material or format?
Share your requirements.

Discuss Your Setup

How to Order an Induction Sealing Machine

  1. 1Share Details

    Send a cap with liner and bottles per minute.

  2. 2Choose the Model

    We check the cap range and head.

  3. 3Agree the Test

    Agree a seal test on your cap and bottle.

  4. 4Confirm the Order

    Review the price, the induction sealing machine configuration and terms.

  5. 5Check and Ship

    Run the checks you agreed on the induction sealing machine, then pack and ship.

Induction Sealing Machines FAQs

Answers to questions the specs do not cover.

Request a Quote
Does my cap need a foil liner?

Yes. The seal is the foil under the cap. Without a foil liner, induction does nothing.

Is there a handheld induction sealer?

Our induction sealer is a conveyor model. We do not currently list a handheld sealer.

Do I need water cooling?

No. The machine is air-cooled.

What cap sizes can it seal?

Seal diameters of 15–60 mm and 50–120 mm.

How fast does it run?

20–40 bottles a minute.

Request a Quote for Induction Sealing Machines

Tell us the cap, the liner and the bottle first. Add the rest when you have it.

  • Cap sample with liner
  • Bottle sample
  • Bottles per minute
  • Supply voltage
  • Delivery country

Request a Quote for Your Induction Sealing Machine

Sending opens an email draft in your mail app. Nothing is sent until you send that email. See our Privacy Policy.

Have photos or drawings? Send them on WhatsApp: +86 13590158756

Send Us a Cap and a Bottle

Send a cap with its liner and a bottle. We check the seal and reply with what we recommend.

Get a Quote
Air-cooled continuous induction sealing machine with a conveyor