Who Builds Your Perfume Filling Machine?
Most of our core machines are produced in our own factory, and your order terms set who answers for manufacturing and delivery.
Uneven fill lines make perfume bottles look cheap. Our perfume filling machines fill glass or plastic bottles to a set level from 10 to 500 mL, on vacuum, single-head or rotary machines.
Request a QuoteView Photos

Our vacuum perfume fillers draw liquid into the bottle until it reaches a set level, so bottles with slightly different inner volumes still look evenly filled. The four-head model fills four bottles at a time at 40–60 bottles a minute; a single-head pneumatic filler suits small runs and needs no electricity.
For higher volume there is a rotary filler with a turntable, four filling heads and automatic crimping. Perfume usually contains alcohol, so we review the electrical and safety setup before quoting any machine for it.
Discuss Your ApplicationThese four points decide which machine fits your line.
Most of our core machines are produced in our own factory, and your order terms set who answers for manufacturing and delivery.
The vacuum models fill to a liquid level, which hides small differences in bottle volume. Check how your bottle shows the fill line.
One head for trials, four heads for steady production, or a rotary machine when you also want automatic crimping.
Round, square and special-shaped bottles all work on the vacuum models. The rotary machine uses molds for odd shapes.
Send a bottle, the liquid and its alcohol content. We recommend a filler and flag any safety review.
Three fillers side by side. Voltage, air and options are stated in your quotation.
Pick by volume and by how automatic you need the line to be.
| Parameter | 4-Head Vacuum | Single-Head | Rotary |
|---|---|---|---|
| Fill volume | 10–500 mL | 10–300 mL | 10–500 mL |
| Bottle diameter | 7–100 mm | 6–25 mm | 10–70 mm |
| Bottle height | 50–300 mm | 50–200 mm (custom) | 60–200 mm |
| Speed | 40–60 bottles/min | 10–25 bottles/min | 1,000–1,200 bottles/h |
| Fill error | Level fill | Level fill | ≤ ±1% |
| Power | 220 V / 50 Hz, 0.2 kW | Air, 0.4–0.6 MPa, no electricity | 220 V / 50 Hz |
| Size (mm) | 750 × 600 × 1600 | 230 × 390 × 620 | 1200 × 1000 × 1700 |
The bottle neck and the liquid decide the filling head.
| Parameter | What We Check |
|---|---|
| Neck | The filling head must enter the neck. The single-head model suits necks of 6–25 mm. |
| Height | Vacuum models take bottles 50–300 mm tall; the rotary 60–200 mm. |
| Liquid | Thin liquids such as perfume, toner and essence suit vacuum fill. Send viscosity for anything thicker. |
| Alcohol | High-alcohol liquids need a flammable-liquid review of the electrics and venting. |
Settle the utilities before you choose a model.
| Parameter | What We Check |
|---|---|
| Electrical | Vacuum models: 220 V, 50 Hz, 0.2 kW. Single-head needs none. Tell us your supply. |
| Air | The single-head model needs 0.4–0.6 MPa. The rotary line also uses compressed air. |
| Footprint | The rotary machine is about 1,200 × 1,000 mm and weighs about 600 kg. |
| Ventilation | Perfume vapor needs extraction at the filling point. |
Agree the test method with your own bottles.
| Parameter | What We Check |
|---|---|
| Level | Compare the liquid level across a batch of your bottles. |
| Volume | Weigh or measure filled bottles. The rotary filler is rated at ≤ ±1%. |
| Drips | Check the neck and the bottle exterior after filling. |
| Records | Agree before you order whether a test video or record ships with the machine. |
Machine speed is not shift output.
| Parameter | What We Check |
|---|---|
| Speed | Vacuum 40–60 a minute, single-head 10–25 a minute, rotary 1,000–1,200 an hour. |
| Loading | Hand loading often limits the four-head model. |
| Cleaning | Allow time to flush the line when you switch scents. |
The three fillers next to filling by hand.
| This Equipment4-Head Vacuum Filler | Single-Head Filler | Rotary Filler | Hand Filling | |
|---|---|---|---|---|
| Output | 40–60 bottles/min | 10–25 bottles/min | 1,000–1,200 bottles/h | A few per minute |
| Power | Electric, 0.2 kW | Air only | Electric and air | None |
| Crimping | Separate machine | Separate machine | Built in | By hand |
| Best for | Steady small to mid volume | Trials and small runs | Higher volume in one machine | Samples |
| Check first | Bottle neck and height | Neck under 25 mm | Crimp and cap size | Fill consistency |
Four typical perfume filling set-ups and what to settle first.

The upgraded model has stainless heads, a larger return tank and a big screen. Check the bottle height against its 50–300 mm range.
Discuss This Application
The single-head filler runs on compressed air and fills 10–300 mL. Suits small brands and test runs.
Discuss This Application
Bottles are hand-loaded, filled by four heads and crimped on the same turntable. Send crimp and cap sizes.
Discuss This Application
A linear line fills 100 mL bottles at 30–50 a minute with automatic crimping and pressing.
Discuss This ApplicationWhat perfume makers ask about before buying.
Write the test liquid, the pass criteria and what ships with the machine into the quotation.
Discuss Acceptance CriteriaWith these details we can recommend a filler and say what safety review it needs.
Have another material or format?
Share your requirements.
Send a bottle, your liquid and bottles per hour.
We recommend a vacuum, single-head or rotary filler.
Agree a fill test with your bottle and a safety review.
Review the price, the perfume filling machine configuration and terms.
Run the checks you agreed on the perfume filling machine, then pack and ship.
The machine draws air out of the bottle so liquid flows in until it reaches a set level. It suits thin liquids and gives even fill lines even when bottle volumes differ slightly.
Alcohol makes the liquid flammable, so we review the electrical setup and venting before we quote. The single-head model runs on air only, which some buyers prefer.
The rotary filler fills and crimps automatically. The vacuum and single-head fillers do not; crimping is a separate machine.
Within its range, yes. The four-head model takes bottles 7–100 mm across and 50–300 mm tall, but you adjust heads and guides when the size changes.
The single-head model suits small runs and samples, with fill from 10 to 300 mL. Tell us your smallest bottle.
Tell us the bottle and the liquid first. Add the rest when you have it.
Send a bottle, the liquid and your bottles per hour. We reply with the filler we recommend.
Get a Quote