Who Builds Your Wax Melting Machine?
Most of our core machines are made in our own factory. We take responsibility for manufacturing, quality and delivery under the agreed order terms.
Melting wax in stove-top pots slows the whole pour day. Our oil-jacketed wax melters hold 150 kg or 250 kg at a steady temperature, so the wax is ready when your pouring crew is.
Request a Quote

A wax melter turns blocks, slabs or pellets into liquid wax at a steady temperature and holds it there until you fill. These are production melters, not hobby ones: the smaller pot holds about 150 kg. They heat through an oil jacket around the pot, so the wax is not touched by a hot element, and a digital panel sets the temperature.
Pot sizes are named in jin, a Chinese weight unit where 1 jin is 0.5 kg. The 300 jin pot holds about 150 kg and the 500 jin pot about 250 kg. Pick the size from the batch you pour in one go, not from your daily total, because the melter has to stay full enough to heat evenly.
Discuss Your ApplicationThese four points decide whether a melter fits your pouring routine.
Most of our core machines are made in our own factory. We take responsibility for manufacturing, quality and delivery under the agreed order terms.
Heat reaches the wax through a thermal-oil jacket. The 300 jin pot takes 25 kg of oil, so allow for the first oil fill when you plan start-up.
We offer 300 jin and 500 jin pots. A larger 1200 jin tank is covered under melting tanks.
Pots have a bottom outlet with a ball valve, so you can run hose to a filler or a holding tank. Confirm the outlet size for your hose.
Send the wax type and the kilograms you pour at a time. We recommend a pot and confirm the heating and power details in the quotation.
The two round pots side by side. Power, voltage and control details are stated in your quotation.
Two round pots cover most small and mid-size candle operations.
| Parameter | 300 Jin Pot | 500 Jin Pot |
|---|---|---|
| Wax capacity | About 150 kg (330 lb) | About 250 kg (550 lb) |
| Outer size (L × W × H) | 1.05 m × 72 cm × 1.1 m | 1.2 m × 87 cm × 1.1 m |
| Inner pot | 60 cm across, 60 cm deep | Confirmed in the quotation |
| Machine weight | About 120 kg | Confirmed in the quotation |
| Thermal oil fill | 25 kg | Confirmed in the quotation |
| Power and voltage | Stated for your supply | Stated for your supply |
Wax type and batch size set the pot size and the heating time.
| Parameter | What We Check |
|---|---|
| Wax type | Soy, paraffin, palm and blends melt and hold at different temperatures. Send your data sheet. |
| Batch size | Fill the pot to a safe working level for each pour; the pot should not sit mostly empty. |
| Start form | Blocks, slabs or pellets. Large blocks may need cutting to fit the pot opening. |
| Additives | Say whether you mix fragrance or dye in the pot or in a separate vessel. |
The pot is only useful if the wax can leave it where you need it.
| Parameter | What We Check |
|---|---|
| Footprint | 300 jin: about 1.05 × 0.72 m. 500 jin: about 1.2 × 0.87 m. Add room to open the lid. |
| Height | Both pots are about 1.1 m tall, so check shelf and ceiling clearance. |
| Electrical | Tell us your supply voltage and phase before we quote. |
| Wax transfer | Gravity drain, hose or pump to the filler. Heat-trace or insulate long hose runs. |
| Floor load | Pot weight plus wax: add 150 to 250 kg of wax to the machine weight. |
Agree what you will measure before the machine ships.
| Parameter | What We Check |
|---|---|
| Set temperature | Compare the panel reading with a probe in the wax at your working temperature. |
| Hold stability | Watch how far the wax temperature drifts over an agreed time. |
| Leak check | Fill with water or wax and look at the drain valve, the lid and the oil jacket seals. |
| Records | Agree which test records, photos or video ship with the machine. |
We do not publish a melting rate without a test, because it depends on your wax.
| Parameter | What We Check |
|---|---|
| Melting time | Set by wax form, starting temperature and heater power. Ask for a figure for your wax. |
| Pours per day | Divide your daily wax weight by the pot size. Two small pots can beat one large one for staggered pours. |
| Recovery | Allow time for fresh wax to come back to temperature after topping up. |
Compare the round melting pot with a large tank, a hot plate and a mixing vessel.
| This EquipmentWax Melting Machine | Melting Tank | Pot on a Hot Plate | Wax Mixing Machine | |
|---|---|---|---|---|
| Typical size | 150–250 kg pots | About 600 kg tank class | A few kilograms | Sized to the mix batch |
| Heating | Oil jacket, digital control | Oil jacket, several heating tubes | Direct heat from below | Confirmed per project |
| Best for | Small and mid-size pours | Large daily wax volume | Samples and test batches | Blending wax, scent and dye |
| Wax transfer | Bottom drain and ball valve | Drain and transfer to a filler | Ladle or pitcher | Confirmed per project |
| Check first | Pot size against pour size | Floor load and power | Temperature control | Agitator type and cleaning |
Four typical melting jobs and what to settle first.

A 300 jin pot melts about 150 kg at a time, which is far more than a kitchen pot. Check that your daily pours justify filling it.
Discuss This Application
The larger pot holds about 250 kg. Plan the drain height and hose so wax reaches your filler without cooling in the line. The photo shows a holding tank and pump beside a row filler.
Discuss This Application
Wax from a previous batch stays in the pot and drain. Allow time to empty and wipe the pot before the next fragrance.
Discuss This Application
On a row-fill line, wax runs from a heated holding tank by pump and hose. Send a sketch of your layout so we can check the route.
Discuss This ApplicationWhat candle makers ask about melters before they order.
Write the test method, the pass criteria and what ships with the machine into the quotation.
Discuss Acceptance CriteriaWith these details we can recommend a pot size and state the power and heating details for your supply.
Have another material or format?
Share your requirements.
Send your wax type, pour size and daily wax use.
We recommend a 300 jin or 500 jin pot, or a larger tank.
Agree a test melt with your wax and the temperature checks.
Review the price, the wax melting machine configuration and terms.
Run the checks you agreed on the wax melting machine, then drain, pack and ship.
It depends on candle weight. A 300 jin pot holds about 150 kg of wax; divide that by the wax weight per candle, and leave a margin so the pot is not run empty. Send your candle weights and we will work it out for your formats.
Jin is a Chinese weight unit, and one jin is 0.5 kg. So 300 jin is about 150 kg and 500 jin is about 250 kg. The quotation states both units.
Yes, through the bottom drain, a hose and, if needed, a pump. The drain height, hose length and wax temperature decide whether gravity is enough. Send your layout and we confirm the route.
The 300 jin pot takes 25 kg of thermal oil. Whether the oil is supplied with your machine is stated in the quotation.
It is better to add fragrance after the wax is at working temperature and just before pouring, because heat drives scent off. Tell us your process and we will check the pot suits it.
Tell us the wax and the pour size first. Add the rest when you have it.
Send the wax type, the kilograms per pour and your supply voltage. We reply with the pot size we recommend and the specs we would quote.
Get a Quote