Who Builds Your Semi Automatic Labeling Machine?
Most of our core machines are produced in our own factory. We take responsibility for manufacturing, quality and delivery under the agreed order terms.
You can get tight label placement without a conveyor line. A semi automatic labeling machine places labels to 0.5 mm while you position each item, at 20 to 35 a minute in a 920 mm bench frame.
Request a QuoteView Photos

A semi-automatic labeler is a compact bench machine: you set the product in place and press a pedal or button, and the machine feeds one label and applies it. It has a manual and an automatic mode, so you can place by hand or let it run a set cycle.
The flat model suits flat, curved, round, concave and convex surfaces. The round model labels bottles from 10 to 160 mm across and up to 250 mm tall, with single or double labels. Both weigh about 41–45 kg and stand on a bench.
Discuss Your ApplicationWhy small producers pick a bench labeler.
Most of our core machines are produced in our own factory. We take responsibility for manufacturing, quality and delivery under the agreed order terms.
Placement is ±0.5 mm, tighter than the ±1 mm of the automatic models, because you position each item yourself.
The flat model handles flat, curved, round, concave and convex surfaces.
At about 920 × 470 × 500 mm it fits on a bench next to a filler.
Send an item, a label and your daily count. We pick the model.
The flat and round bench labelers side by side.
Pick by item shape.
| Parameter | Flat Model | Round Model |
|---|---|---|
| Speed | 20–30 per min | 20–35 per min |
| Placement | ±0.5 mm | ±0.5 mm |
| Item size | L 20–200, W 20–150, T 0.2–120 mm | Dia 10–160 mm; height up to 250 mm |
| Label size | L 15–100 mm, W 15–110 mm | L 20–380 mm, W 20–220 mm |
| Core | 76 mm | 76 mm |
| Size and weight | 920 × 470 × 500 mm; 41 kg | About 920 × 470 × 500 mm; 45 kg |
Check against the ranges.
| Parameter | What We Check |
|---|---|
| Item | The item must fall within the flat or round range. |
| Label | The label length and width must fall within the range. |
| Core | The label roll core is 76 mm inside diameter. |
| Position | Send a drawing of where the label goes on the item. |
Small and simple.
| Parameter | What We Check |
|---|---|
| Space | The machine is about 920 × 470 mm. |
| Power | Tell us your supply voltage. |
| Pedal | Keep the pedal within reach of the operator. |
| Backing | Keep a bin for the waste backing paper. |
Judge the label on the item.
| Parameter | What We Check |
|---|---|
| Position | Measure the label offset on 50 pieces. |
| Finish | Look for bubbles and wrinkles. |
| Straight | Check that the label is not skewed. |
| Operator | Have two operators label the same batch and compare. |
The operator sets the pace.
| Parameter | What We Check |
|---|---|
| Rated speed | The flat model runs 20–30 a minute and the round model 20–35. |
| Real pace | Loading and positioning set the real pace. |
| Changeover | Changing to a new item and label is quick. |
What changes as you add automation.
| This EquipmentSemi-Automatic Labeler | Automatic Labeler | Hand Labeling | UV DTF Transfer | |
|---|---|---|---|---|
| Feeding | By hand | Conveyor | By hand | By hand |
| Speed | 20–35/min | 30–120/min | Slow | Printed on demand |
| Placement | ±0.5 mm | ±1 mm | Varies | By hand |
| Best for | Small batches, many shapes | Steady lines | Samples | Foil and crystal labels |
| Check first | Item and label size | Container shape | Consistency | Surface |
Four jobs for a bench labeler.

Single or double labels on round items up to 250 mm tall.
Discuss This Application
Flat, curved, round, concave and convex faces, up to 200 mm long.
Discuss This Application
A new item and label means a quick adjustment, not a line change.
Discuss This Application
When your volume grows, an automatic labeler takes over. Tell us your plan.
Discuss This ApplicationWhat buyers ask before they order a bench labeler.
Write the test method, the placement tolerance and what ships with the machine into the quotation.
Discuss Acceptance CriteriaWith these details we can pick the right bench labeler.
Have another material or format?
Share your requirements.
Send your item, label and daily count.
We pick the flat or the round bench labeler.
Agree a labeling test with two operators.
Review the price, the semi automatic labeling machine configuration and terms.
Run the checks you agreed on the semi automatic labeling machine, then pack and ship.
No. It is a bench machine of about 920 × 470 × 500 mm. We do not currently list a handheld applicator.
In manual mode you control each label; in automatic mode it runs a set cycle when you place an item.
Flat labels go on flat or lightly curved faces. Round wraps around a bottle. Send the item.
The label core is 76 mm inside diameter.
Placement is ±0.5 mm. Tell us what your label design tolerates.
Tell us the item and the label first. Add the rest when you have it.
Send an item and a label. We reply with the bench labeler we recommend.
Get a Quote