Who Builds Your Reed Diffuser Filling Machine?
We make most of our core machines in our own factory, so questions about this model go to the company that builds and ships it.
Diffuser bottles come in every neck size, and an uneven fill line shows in clear glass. Our reed diffuser filling machines handle the liquid step to a set level; reeds and caps are separate steps.
Request a QuoteView Photos

A reed diffuser has three production steps: filling the liquid, closing the bottle and inserting the reeds. We build the filling machines and the capping machines; reed insertion is done by hand or on equipment we do not make.
Diffuser liquid is usually thin, so level filling works well and leaves an even line in clear glass. Bottle shapes vary a lot, from narrow-neck jars to wide-mouth ones. Send a bottle and we check which filling head fits the neck.
Discuss Your ApplicationThese four points decide which filler fits.
We make most of our core machines in our own factory, so questions about this model go to the company that builds and ships it.
Level filling gives every bottle the same line, which matters in clear glass.
Diffuser bottles come in many neck sizes. The single-head filler suits necks of 6–25 mm, and the vacuum model takes bottles 7–100 mm across.
Many diffuser bases contain solvent or alcohol. Say so, and we review the safety setup.
Send the liquid type, its solvent content and a bottle. We tell you which filler fits.
No filler is built only for diffusers. These are the liquid fillers we use for diffuser liquid.
Pick by neck width and volume.
| Parameter | 4-Head Vacuum | Single-Head |
|---|---|---|
| Fill volume | 10–500 mL | 10–300 mL |
| Bottle diameter | 7–100 mm | 6–25 mm |
| Bottle height | 50–300 mm | 50–200 mm (custom) |
| Speed | 40–60 bottles/min | 10–25 bottles/min |
| Power | 220 V / 50 Hz, 0.2 kW | Air 0.4–0.6 MPa |
These decide the head and the safety review.
| Parameter | What We Check |
|---|---|
| Base | Alcohol-based or solvent-based liquids need a flammable-liquid review. |
| Fragrance | A high oil load can make the liquid thicker. Send a viscosity figure. |
| Neck | Narrow-neck bottles suit the single-head filler. |
| Volume | Give the target fill and the tolerance you accept. |
Plan ventilation first.
| Parameter | What We Check |
|---|---|
| Ventilation | Solvent vapor needs extraction at the filler. |
| Utilities | The vacuum filler runs on 220 V and the single-head on compressed air. |
| Space | Leave room for a capping step and a reed station after filling. |
In clear glass, the level is visible.
| Parameter | What We Check |
|---|---|
| Fill line | Compare the fill line across a batch. |
| Drips | Check the neck and the outside of the bottle. |
| Overfill | Make sure the liquid does not overflow when the reeds go in. |
| Records | Agree before you order whether a test video or record ships with the machine. |
Filling is rarely the limit.
| Parameter | What We Check |
|---|---|
| Fill speed | The vacuum filler runs 40–60 a minute and the single-head 10–25. |
| Reed station | Inserting reeds by hand is usually the slowest step. |
| Capping | Add a capper if you use screw caps. |
Filling next to capping, reed insertion and labeling.
| This EquipmentDiffuser Filler | Bottle Capper | Reed Insertion | Labeling | |
|---|---|---|---|---|
| Step | Fills the liquid | Closes the bottle | Places reeds | Applies the label |
| We build it | Yes | Yes | No | Yes |
| Check first | Neck and liquid | Cap type and torque | Reed count and fit | Bottle shape |
| Best for | Even fill lines | Tight closing | Presentation | Branding |
Four steps in diffuser production and the machine for each.

The four-head filler fills to a set line in clear glass. Send the bottle height; it takes 50–300 mm.
Discuss This Application
The single-head filler fits necks of 6–25 mm and runs on air only.
Discuss This Application
A benchtop capper handles screw caps after filling.
Discuss This Application
A semi-automatic round bottle labeler can apply front and back labels.
Discuss This ApplicationWhat diffuser makers ask before they order a filler.
Write the test liquid, the pass criteria and what ships with the machine into the quotation.
Discuss Acceptance CriteriaWith these details we can say which filler fits your diffuser line.
Have another material or format?
Share your requirements.
Send your liquid, bottle and bottles per hour.
We recommend a vacuum or single-head filler.
Agree a fill test with your liquid.
Review the price, the reed diffuser filling machine configuration and terms.
Run the checks you agreed on the reed diffuser filling machine, then pack and ship.
No. Our machines fill and cap. Reeds are inserted by hand or on equipment we do not make.
Not as a separate model. Our vacuum and single-head fillers are what we use for diffuser liquid. Send your liquid and bottle and we check the fit.
It fills the liquid. For corks, ask us about the closing step, because our capping machines are built for threaded caps.
Reeds take up volume. Set a fill line that leaves headspace, and test with a full reed bundle.
The vacuum filler takes bottles 7–100 mm across and 50–300 mm tall. The single-head filler takes necks of 6–25 mm.
Tell us the liquid and the bottle first. Add the rest when you have it.
Send the liquid, a bottle and your bottles per hour. We reply with the filler we recommend.
Get a Quote