Who Builds Your Perfume Crimping Machine?
Our own factory builds most of our core machines. Build quality and delivery are our responsibility under the order terms.
A perfume sprayer that wobbles or leaks usually has a poor crimp. Our perfume crimping machines seal 13 to 22 mm collars by air or by hand, at up to 40 bottles a minute, with no electricity.
Request a Quote

Crimping squeezes a metal collar around the bottle neck so the sprayer stays tight. The pneumatic crimper does this on compressed air with seal diameters of 13, 15, 17, 20 and 22 mm, bottle heights of 30–300 mm and 15–40 bottles a minute.
For small batches, manual presses come in four colors and need no power or air. A tight crimp is the difference between a bottle that sprays and one that leaks in a case, so check the collar against your actual pump.
Discuss Your ApplicationThese four points decide which crimper fits.
Our own factory builds most of our core machines. Build quality and delivery are our responsibility under the order terms.
Each seal diameter needs its own head. Check your collar against 13, 15, 17, 20 and 22 mm.
Both the pneumatic and the manual crimper run without electricity, which keeps an electric motor away from alcohol vapor. Your site still needs its own safety review.
The press height adjusts for bottles 30–300 mm tall.
Send a bottle with its pump. We confirm the crimp head and the machine.
The pneumatic crimper and the manual press side by side.
Pick by volume.
| Parameter | Pneumatic Crimper | Manual Press |
|---|---|---|
| Seal diameter | 13, 15, 17, 20 or 22 mm | Matched to the collar |
| Bottle height | 30–300 mm | Adjustable |
| Bottle diameter | 15–100 mm | Matched to the base |
| Speed | 15–40 bottles/min | By hand |
| Power | Air 0.4–0.6 MPa; no electricity | None |
| Size (mm) | 280 × 280 × 530 | Bench top |
The collar is the critical part.
| Parameter | What We Check |
|---|---|
| Collar | The seal diameter must be 13, 15, 17, 20 or 22 mm. |
| Neck | The lip of the neck has to support the crimp. |
| Pump | The dip tube and the height of the actuator affect press clearance. |
| Bottle | The bottle height must fall within 30–300 mm. |
Small footprint, simple needs.
| Parameter | What We Check |
|---|---|
| Space | The pneumatic crimper is about 280 × 280 mm on a bench. |
| Air | The pneumatic model needs 0.4–0.6 MPa of compressed air. |
| Pedal | Place the foot pedal where the operator can reach it. |
| Vapor | There is no electric motor at the crimping point. |
A good crimp is tight and even.
| Parameter | What We Check |
|---|---|
| Hold | Try to twist the pump. It should not turn. |
| Marks | The crimp marks should be even all the way round. |
| Glass | Look for chips at the neck. |
| Leak | Lay bottles on their side and shake them. |
Crimping should keep pace with filling.
| Parameter | What We Check |
|---|---|
| Speed | The pneumatic crimper runs 15–40 bottles a minute. |
| Head changes | Allow time to swap heads when the collar size changes. |
| Loading | Placing bottles by hand sets the real pace. |
What each crimping option does.
| This EquipmentPneumatic Crimper | Manual Press | Rotary or Linear Line | Cap Press | |
|---|---|---|---|---|
| Power | Air | Hand lever | Electric and air | Air |
| Speed | 15–40/min | Slow | 30–50/min on line | 20–40/min |
| Action | Crimps collars | Crimps collars | Fills and crimps | Presses |
| Best for | Steady small runs | Samples and trials | Full lines | Press-fit collars |
| Check first | Collar size | Hand strength and repeatability | Layout | Press range |
Four crimping jobs.

The air crimper has adjustable height and needs no electricity.
Discuss This Application
Manual presses come in pink, rose gold, white and black, and need no power.
Discuss This Application
Pair a crimper with a single-head or a vacuum filler, and crimp each bottle straight after it is filled.
Discuss This Application
The rotary filler crimps automatically at 13–22 mm.
Discuss This ApplicationWhat perfume makers ask before they order a crimper.
Write the test method, the pass criteria and what ships with the machine into the quotation.
Discuss Acceptance CriteriaWith these details we can confirm the crimp head.
Have another material or format?
Share your requirements.
Send a bottle, a pump and your bottles per hour.
We pick the pneumatic or the manual crimper.
Agree a hold and leak test on your collar.
Review the price, the perfume crimping machine configuration and terms.
Run the checks you agreed on the perfume crimping machine, then pack and ship.
Capping screws or presses a cap on. Crimping deforms a metal collar around the neck, which is how most perfume sprayers are fixed.
The pneumatic crimper covers 13, 15, 17, 20 and 22 mm. Send your collar and we confirm.
No. The pneumatic crimper runs on compressed air and the manual press on hand power.
For small runs, yes. For steady volume, the pneumatic crimper is more consistent.
Yes. Our perfume pump pressing machine is a separate cap press, and a dip tube cutter is available on request.
Tell us the bottle, the pump and the collar first. Add the rest when you have it.
Send a bottle with its pump and your target rate. We confirm the crimp head.
Get a Quote