Double Sided Labeling
Machines

Front and back labels that do not line up make a bottle look careless. Our front and back labeling machine, a double-sided labeler, applies both labels in one pass to flat, round and square bottles at 30 to 120 a minute.

Request a QuoteView Photos
30–120/minSpeed
20–120 mmBottle diameter
±1 mmPlacement
Automatic double-sided labeling machine with a conveyor
One PassFront and back together
Automatic double-sided labeling machine with a conveyor

Double Sided Labeling Machines for Front and Back Labels

A double-sided labeler puts a label on each face of a bottle as it moves along the conveyor, so you do not need two passes or two machines. Labels on the two faces stay aligned because both heads work on the same bottle at once.

The machine takes flat, round and square bottles, with single-side or double-side labeling. Label length runs from 20 to 300 mm, backing width 20 to 170 mm and roll outside diameter up to 300 mm with a 76 mm core.

Discuss Your Application

Equipment and Process Examples

Double-sided labeling machine with label reels on both sides of the conveyor
Two opposing pressure rollers beside an empty labeler conveyor

Request a Quote

Why Choose a Double-Sided Labeler

Why it suits flat and square bottles.

Who Builds Your Double Sided Labeling Machine?

Our own factory builds most of our core machines, and we answer for build quality and delivery under your order terms.

One Pass

Both faces are labeled while the bottle moves once, so labels line up and handling halves.

Flat, Round and Square

The same machine handles flat, round and square bottles with the right guides.

Single or Double Side

Run one head or both, and switch from job to job.

Tell Us Your Bottle and Labels

Send a bottle with the front and back labels. We check the fit.

Double Sided Labeler Specifications

The double-sided labeler at a glance. Options and spare parts are listed in your quotation.

Double-Sided Labeler at a Glance

One model with a wide range.

  • 30–120 per minute
  • Bottle dia 20–120 mm
  • ±1 mm placement
  • Label OD up to 300 mm
Get a Quote
ParameterDouble-Sided Labeler
Speed30–120 per min
Bottle diameter20–120 mm
Bottle shapesFlat, round and square
Placement±1 mm
Label length20–300 mm
Backing width20–170 mm
RollOutside diameter 300 mm; core 76 mm
Power220 V / 50 Hz

Double-Sided or Two Passes?

One pass next to two single-side machines, a bench labeler and hand labeling.

This EquipmentDouble-Sided LabelerTwo Single-Side LabelersBench LabelerHand Labeling
PassesOneTwoTwoTwo
AlignmentFront and back set togetherDepends on the second passBy handBy hand
Speed30–120/minPer machine20–35/minSlow
Best forFlat and square bottlesMixed productsSamplesSamples
Check firstBottle widthHandling between passesItem sizeConsistency

Double Sided Labeling Applications

Four front-and-back labeling jobs.

View Selection Criteria

Double-Sided Labeling Problems and What Decides Them

What buyers ask before they order a front and back labeler.

Front and Back Offset
The two labels have to sit at the same height. Check the head setup on your bottle.
Bubbles
Both faces need smooth, even pressure. Test your own labels.
Narrow Bottles
Narrow bottles tip over. Use guides to hold them upright.
Two Rolls
Two rolls mean two roll changes. Plan for both.
Speed
Larger labels run slower. Tell us the label sizes.

What to Check in a Sample Test

  1. AlignmentMeasure the front and back label heights.
  2. FinishLook for bubbles.
  3. StabilityRun for 15 minutes and watch for tipping.
  4. HoldCheck the edges after 24 hours.

Agree the Alignment Test Before You Order

Write the test method, the alignment tolerance and what ships with the machine into the quotation.

Discuss Acceptance Criteria
Sample ReviewYour bottle and both labels
Label TestAlignment and speed
What Ships With ItManual, wiring diagram

What to Send Before We Quote

With these details we can check that both labels fit.

About Your Container and Label

  • MaterialsBottle and two labels
  • ProcessFront and back labeling
  • Label DetailsBottle size, label sizes and rate

Containers and Labels to Send

  • Bottle SetEach shape you label
  • Label RollsFront and back
  • Label DrawingBoth positions
  • SurfaceGlass or plastic
  • Photos of Your Labeling LineYour line
  • Output GoalBottles per hour

About Your Line and Space

  • Supply voltage
  • Space and conveyor height
  • Link to capper

Have another material or format?
Share your requirements.

Discuss Your Setup

How to Order a Double Sided Labeling Machine

  1. 1Share Details

    Send a bottle, two labels and bottles per hour.

  2. 2Choose the Model

    We confirm the head layout and guides.

  3. 3Agree the Test

    Agree a test with alignment checks.

  4. 4Confirm the Order

    Review the price, the double sided labeling machine configuration and terms.

  5. 5Check and Ship

    Run the checks you agreed on the double sided labeling machine, then pack and ship.

Double Sided Labeling Machines FAQs

Answers to questions the specs do not cover.

Request a Quote
Can it label only one side?

Yes. It runs single-side or double-side labeling.

What bottle shapes work?

Flat, round and square bottles.

How wide can the label be?

Label length runs 20–300 mm and backing width 20–170 mm.

What roll size does it take?

Up to 300 mm outside diameter on a 76 mm core.

How fast does it run?

30–120 a minute, and larger labels run slower.

Request a Quote for Double Sided Labeling Machines

Tell us the bottle and both labels first. Add the rest when you have it.

  • Bottle sample
  • Front and back label sizes
  • Bottles per hour
  • Supply voltage
  • Delivery country

Request a Quote for Your Double Sided Labeling Machine

Sending opens an email draft in your mail app. Nothing is sent until you send that email. See our Privacy Policy.

Have photos or drawings? Send them on WhatsApp: +86 13590158756

Send Us a Bottle and Two Labels

Send a bottle with its front and back labels. We check the fit and reply with what we recommend.

Get a Quote
Automatic double-sided labeling machine with a conveyor