Who Builds Your Bottle Labeling Machine?
Most of our core machines are produced in our own factory, with manufacturing and delivery responsibility set in your order terms.
Different bottles need different labeling methods, and the wrong one skews every label. Our bottle labeling machines wrap round bottles and label flat and square ones on one or two faces, from 10 to 300 mm across.
Request a QuoteView Photos

Bottle shape decides the method. Round bottles take a wrap-around label. Flat and square bottles take labels on one or two faces. Some bottles need both a front and a back label, or a neck label.
We cover this with a round labeler for diameters of 25–300 mm, a double-sided labeler for flat, round and square bottles of 20–120 mm, and bench machines for small runs of 10–160 mm. Send a bottle and we match it to a machine.
Discuss Your ApplicationSend a sample, a container or a photo of what you make. We reply with the machine we would look at first, and what we still need to confirm.
Request a Quote
Answer these four questions to find the right labeler.
Most of our core machines are produced in our own factory, with manufacturing and delivery responsibility set in your order terms.
A wrap-around machine needs a round body. Flat sides need a face labeler.
Front and back labels need a double-sided machine, or two passes through a single-side one.
Each model has a diameter range. Check your smallest and your largest bottle against it.
Send a bottle and label. We tell you which labeler fits.
Three labelers compared by bottle size and speed.
Pick by shape and volume.
| Parameter | Auto Round | Auto Double-Sided | Bench Round |
|---|---|---|---|
| Bottle size | Dia 25–300 mm | Dia 20–120 mm; flat, round, square | Dia 10–160 mm; up to 250 mm tall |
| Speed | 40–70/min | 30–120/min | 20–35/min |
| Label size | 20–290 mm, to sample | L 20–300, backing 20–170 mm | L 20–380, W 20–220 mm |
| Labels per bottle | Single or double | Single or double side | Single or double |
| Power | Air 0.4–0.6 MPa | 220 V / 50 Hz | Quoted per order |
| Size (mm) | 1950 × 1200 × 1530 | Quoted per order | 920 × 470 × 500 |
Measure the real bottle.
| Parameter | What We Check |
|---|---|
| Size | Your bottle must fall within the model range. |
| Shape | Round, flat or square. Tapered bodies skew labels. |
| Panel | A flat label panel is easier to label than a curved shoulder. |
| Surface | Glass, plastic and coated bottles hold labels differently. |
Plan the line.
| Parameter | What We Check |
|---|---|
| Space | The automatic round labeler is 1.95 m long. The bench machine is 0.92 m. |
| Power | The double-sided labeler runs on 220 V, 50 Hz. |
| Air | The automatic round labeler needs 0.4–0.6 MPa of compressed air. |
| Line | Place the labeler after the capper. |
Judge the label on the bottle.
| Parameter | What We Check |
|---|---|
| Position | Measure the label offset on 50 bottles. |
| Wrinkles | Check that wrap labels lie flat without wrinkles. |
| Overlap | Check the seam where a wrap label meets itself. |
| Hold | Check the label edges after a day. |
Keep pace with capping.
| Parameter | What We Check |
|---|---|
| Speed | Match the labeler to the speed of your capper. |
| Rolls | Larger label rolls mean fewer stops. |
| Changeover | Allow time to change the guides for another bottle size. |
The labelers by bottle shape.
| This EquipmentAutomatic Round Labeler | Double-Sided Labeler | Bench Round Labeler | Hand Labeling | |
|---|---|---|---|---|
| Best for | Round bottles at speed | Flat and square bottles | Small runs of round bottles | Samples |
| Speed | 40–70/min | 30–120/min | 20–35/min | Slow |
| Feeding | Conveyor | Conveyor | By hand | By hand |
| Check first | Diameter | Face width | Label size | Consistency |
Four common bottle labeling jobs.

Wrap-around labels on bottles from 25 to 300 mm across.
Discuss This Application
Labels on one or two faces of flat, round and square bottles.
Discuss This Application
The bench machine takes bottles from 10 mm across, so it suits vials and small runs.
Discuss This Application
Place the labeler after the capper, so the bottle is closed and dry when it is labeled.
Discuss This ApplicationWhat buyers ask before they order a bottle labeler.
Write the test method, the placement tolerance and what ships with the machine into the quotation.
Discuss Acceptance CriteriaWith these details we can pick the right bottle labeler.
Have another material or format?
Share your requirements.
Send a bottle, a label and bottles per hour.
We pick the round, double-sided or bench labeler.
Agree a labeling test on your bottle.
Review the price, the bottle labeling machine configuration and terms.
Run the checks you agreed on the bottle labeling machine, then pack and ship.
Within its range, yes. The automatic round labeler covers 25–300 mm, and you adjust the guides for each size.
Yes, on the bench round labeler down to 10 mm diameter.
The double-sided labeler does this in one pass for flat, round and square bottles.
A neck label needs a different head. Send us a bottle and tell us where the label goes.
No. We build machines only.
Tell us the bottle and the label first. Add the rest when you have it.
