Candle Wax
Melting Tanks

When one round pot cannot keep your pouring stations supplied, an industrial wax melter is the next step. The 1200 jin tank melts about 600 kg and runs six heating tubes you switch on and off.

Request a Quote
600 kg1200 jin tank (about 1,320 lb)
6 tubesIndependent heating tubes
350 kgMachine weight, empty
Industrial wax melter: a rectangular stainless-steel melting tank with a drain valve and an electrical cabinet
Sized for Daily VolumeTank, not a pot
Rectangular stainless-steel wax melting tank with a drain valve and an electrical cabinet

Industrial Wax Melting Tanks for Candle Factories

A melting tank is the right step up when one round pot cannot keep your pouring stations supplied. The 1200 jin tank is a rectangular stainless box with a hinged lid, an oil-filled jacket and six heating tubes that switch independently, so you can run part of the tank when a batch is small.

The inner chamber measures 1.22 m by 86 cm and 70 cm deep, which suits slabs and large blocks. Wax leaves through a ball-valve drain at the front, and the electrical cabinet sits on the side with its own door.

Discuss Your Application

Why Factories Choose a Melting Tank

What matters once your volume goes up.

Who Builds Your Candle Wax Melting Tank?

Most of our core machines are made in our own factory. Your quotation names who builds this model, the tank size, the heater layout and what is tested before shipment.

Six Independent Heating Tubes

Switch tubes on or off to match the batch. A half-full tank does not need every tube running.

Room for Large Blocks

The 1.22 m by 86 cm chamber takes slabs that would not fit a round pot, which saves cutting time.

Cabinet You Can Reach

The electrical cabinet has its own side door, so service work does not mean lifting the tank lid.

Tell Us Your Daily Wax Volume

Send kilograms per day and how many stations you feed. We confirm whether one tank is enough or two smaller ones suit you better.

Wax Melting Tank Specifications

The 1200 jin tank at a glance. Electrical details are stated in your quotation.

1200 Jin Tank at a Glance

One standard tank size. Larger or smaller tanks are quoted on request.

  • About 600 kg of wax
  • Six independent heating tubes
  • Thermal-oil jacket
  • Ball-valve drain
Get a Quote
Parameter1200 Jin Tank
Wax capacityAbout 600 kg (1,320 lb)
Outer size (L × W × H)1.56 m × 1.0 m × 1.2 m
Inner chamber (L × W × H)1.22 m × 86 cm × 70 cm
Machine weightAbout 350 kg
Thermal oil fill75 kg
HeatingSix independent tubes
Power and voltageStated for your supply

Melting Tank or Round Melter?

A large tank next to a round pot, a hot plate and a mixing machine.

This EquipmentMelting TankRound Wax MelterHot Plate and PotWax Mixing Machine
CapacityAbout 600 kg150–250 kgA few kilogramsSized to the mix batch
HeatingSix independent tubes in an oil jacketOil jacket, one controlDirect heat from belowConfirmed per project
Best forAll-day factory pouringSmall and mid-size poursSamplesBlending wax and scent
FootprintAbout 1.56 × 1.0 mAbout 1.05–1.2 m longBench topConfirmed per project
Check firstFloor load and powerPot size against pour sizeTemperature controlAgitator and cleaning

Melting Tank Applications

Four jobs where a large tank earns its floor space.

View Selection Criteria
Rectangular stainless-steel wax melting tank with a drain valve and an electrical cabinet

Keep Several Pour Stations Supplied

One 600 kg tank can feed more than one filler. Add up the wax used per hour across all stations before sizing.

Discuss This Application

Tank Problems and What Decides Them

What buyers ask about before they commit to a tank.

Floor Load
A full tank is close to a tonne. Confirm your floor can carry it, and where the forklift can stand.
Cold Spots
Wax near the walls can set if tubes are off. Use enough tubes for the batch and stir if your process needs it.
Long Hose Runs
Wax cools in long lines. Keep the run short, slope it, and heat-trace or insulate it.
Power Demand
Six tubes draw real power. Check your breaker and cable size with your electrician before delivery.
Oversizing
If you pour 100 kg a day, a 600 kg tank is too big. Ask for a smaller pot instead.

What to Check at Commissioning

  1. All Tubes OnRun every tube and record the temperature rise.
  2. Partial LoadRun half the tubes with a small batch and check evenness.
  3. Drain FlowDrain at working temperature and check the hose route.
  4. CabinetCheck breakers, labels and wiring against the diagram.

Agree the Heat Test Before You Order

Write the test method, the pass criteria and what ships with the tank into the quotation.

Discuss Acceptance Criteria
Heat TestAll tubes and part load
Leak CheckJacket seals, lid and drain
What Ships With ItManual, wiring diagram, oil fill guide

What to Send Before We Quote

With these details we can confirm whether one tank fits and state the power it needs.

About Your Wax and Jars

  • MaterialsWax type, slab or block size
  • ProcessMelting and holding for several stations
  • Pour DetailsKilograms per hour and per day

Samples and Data to Send

  • Wax Data SheetMelt point and pour temperature
  • Slab SizeLength, width and height
  • Station CountHow many fillers it supplies
  • Hose PlanRoute, length and height
  • Photos of Your Pour StationYour current melting area
  • Output GoalKilograms of wax per day

About Your Floor and Power

  • Supply voltage, frequency and phase
  • Floor load, forklift access and ventilation
  • Drain height and pump position

Have another material or format?
Share your requirements.

Discuss Your Setup

How to Order a Wax Melting Tank

  1. 1Share Details

    Send your wax type, slab size and kilograms per hour.

  2. 2Choose the Model

    We confirm the tank size and the number of heating tubes.

  3. 3Agree the Test

    Agree a heat-up test and the leak and wiring checks.

  4. 4Confirm the Order

    Review the price, the candle wax melting tank configuration and terms.

  5. 5Check and Ship

    Run the checks you agreed on the candle wax melting tank, then drain, crate and ship.

Candle Wax Melting Tanks FAQs

Answers to questions the specs do not cover.

Request a Quote
What does 1200 jin mean in kilograms?

One jin is 0.5 kg, so 1200 jin is about 600 kg of wax, or about 1,320 lb. The quotation states both units.

Can I run only part of the tank?

Yes. The six heating tubes switch independently, so you can heat part of the tank for a small batch. Tell us your smallest batch and we check the layout suits it.

Is the tank suitable for soy and paraffin?

The jacket and tubes are designed for candle wax in general. Each wax holds a different working temperature, so send your data sheet and we confirm the setup.

How do I move wax to my fillers?

Through the front drain, by hose or pump. For several fillers, a heated holding tank near the line avoids long hoses.

Do you make smaller or larger tanks?

We offer 300 and 500 jin round pots and the 1200 jin tank. Other sizes are quoted on request once we know your volume.

Request a Quote for Candle Wax Melting Tanks

Tell us the wax and your daily volume first. Add the rest when you have it.

  • Wax type and working temperature
  • Kilograms per hour and per day
  • Slab or block dimensions
  • Supply voltage and phase
  • Delivery country

Request a Quote for Your Candle Wax Melting Tank

Sending opens an email draft in your mail app. Nothing is sent until you send that email. See our Privacy Policy.

Have photos or drawings? Send them on WhatsApp: +86 13590158756

Tell Us Your Daily Wax Volume

Send the kilograms per day, your wax type and your supply. We reply with the tank we recommend.

Get a Quote
Rectangular stainless-steel wax melting tank with a drain valve and an electrical cabinet