Semi Automatic Bottle
Capping Machines

A semi automatic capping machine gives small producers steady torque without a conveyor line. The benchtop unit runs 25 to 50 bottles a minute in automatic or manual mode; a pneumatic press does 20 to 40.

Request a Quote
25–50/minBenchtop capper
120 WBenchtop motor power
15–350 mmBottle height range
Benchtop semi-automatic capping machine with two motor heads and a foot pedal
Bench SizedAbout 500 × 380 mm
Pneumatic cap pressing machine with a foot pedal

Semi Automatic Bottle Capping Machines for Small Runs

The benchtop capper is a compact machine with two motor heads and a foot pedal. It has an automatic mode and a manual mode, handles bottles from 15 to 350 mm tall, and takes threaded and spray caps. It is designed to tighten quickly without damaging the caps.

For snap-fit and pump collars, there is a pneumatic cap press that does 20–40 bottles a minute and needs no electricity. Both suit workshops where a conveyor line would be too much.

Discuss Your Application

Why Choose a Semi-Automatic Capper

Why small producers pick a semi-automatic capper.

Who Builds Your Semi Automatic Bottle Capping Machine?

Our own factory builds most of our core machines. Questions about build, checks and delivery go to the company that sells you the machine.

Two Modes

Automatic mode runs a set cycle; manual mode lets you control each cap, handy for delicate closures.

Small Footprint

The benchtop unit is about 500 × 380 × 700 mm. It sits on a bench next to your filler.

Low Power

The benchtop capper uses 120 W. The pneumatic press needs only compressed air.

Tell Us Your Cap

Send the cap, the bottle and your batch size. We say which unit fits.

Semi Automatic Capper Specifications

The benchtop capper and the pneumatic press side by side.

Benchtop Capper and Pneumatic Press

Two semi-automatic options.

  • Benchtop: 25–50 bottles/min
  • Pneumatic press: 20–40 bottles/min
  • Air 0.4–0.6 MPa
  • Bottle height up to 350 mm
Get a Quote
ParameterBenchtop CapperPneumatic Cap Press
ActionScrews threaded and spray capsPresses caps and collars
Speed25–50 bottles/min20–40 bottles/min
Bottle height15–350 mm15–300 mm
Cap rangeThreaded and spray capsPress range 10–50 mm (custom)
Power220 V / 50 Hz, 120 W; air 0.4–0.6 MPaAir 0.4–0.6 MPa
Size (mm)500 × 380 × 700250 × 230 × 550

Semi-Automatic, Automatic or Hand Capping?

What changes as you add automation.

This EquipmentBenchtop CapperPneumatic Cap PressAutomatic CapperHand Capping
FeedingBy handBy handConveyorBy hand
Speed25–50/min20–40/min40–90/minSlow
Cap actionScrewPressScrew or pressScrew
Best forSmall batchesCollars and press capsSteady linesSamples
Check firstCap heightPress rangeLine speedTorque consistency

Semi Automatic Capping Applications

Four jobs for a bench capper or a cap press.

View Selection Criteria

Semi-Automatic Capping Problems and What Decides Them

What buyers ask before they order a semi-automatic capper.

Torque Varies
Different operators tighten caps differently. Use automatic mode with a set value.
Scuffed Caps
Ask about soft pads for decorative caps.
Bottle Height Changes
Adjust the head height for each bottle size.
Long Pumps
A long dip tube needs to go in slowly.
Air Supply
Low pressure slows the press. Check your compressor.

What to Check in a Sample Test

  1. TorqueMeasure the removal torque on 20 caps.
  2. MarksLook for scuffs.
  3. Height ChangeTime a change between two bottle heights.
  4. LeaksLay capped bottles on their side.

Agree the Capping Test Before You Order

Write the test method, the torque target and what ships with the machine into the quotation.

Discuss Acceptance Criteria
Sample ReviewYour cap and bottle
Fill TestTorque and cap marks
What Ships With ItManual, air diagram

What to Send Before We Quote

With these details we can pick the right semi-automatic unit.

About Your Liquid and Bottle

  • MaterialsCap, bottle and pump
  • ProcessHand-fed capping
  • Fill DetailsCap type, height and batch size

Bottles and Liquid to Send

  • Cap SampleThe real closure
  • Bottle SetTallest and shortest
  • Pump or Dip TubeWith length
  • Torque TargetIf known
  • Photos of Your Filling AreaYour bench
  • Output GoalBottles per hour

About Your Site and Ventilation

  • Supply voltage and compressed air
  • Bench space
  • Pedal position

Have another material or format?
Share your requirements.

Discuss Your Setup

How to Order a Semi Automatic Capping Machine

  1. 1Share Details

    Send your cap, bottle and batch size.

  2. 2Choose the Model

    We pick the benchtop capper or the pneumatic press.

  3. 3Agree the Test

    Agree a torque and cap-marks test.

  4. 4Confirm the Order

    Review the price, the semi automatic bottle capping machine configuration and terms.

  5. 5Check and Ship

    Run the checks you agreed on the semi automatic bottle capping machine, then pack and ship.

Semi Automatic Bottle Capping Machines FAQs

Answers to questions the specs do not cover.

Request a Quote
Is it a handheld capper?

No. It is a benchtop machine with two motor heads and a foot pedal. We do not currently list a handheld capper.

What are automatic and manual modes?

Automatic runs a set cycle when you press the pedal. Manual lets you control the head so you can seat delicate caps carefully.

Does it need compressed air?

Yes, 0.4–0.6 MPa for both the benchtop capper and the pneumatic press.

How tall can the bottle be?

The benchtop capper takes bottles 15–350 mm tall.

Can I upgrade to an automatic capper later?

Yes. Tell us your plan and we check that a conveyor capper will fit your line when your volume grows.

Request a Quote for Semi Automatic Bottle Capping Machines

Tell us the cap and the bottle first. Add the rest when you have it.

  • Cap sample or drawing
  • Bottle sample and height
  • Batch size and bottles per hour
  • Compressed air available
  • Supply voltage and delivery country

Request a Quote for Your Semi Automatic Bottle Capping Machine

Sending opens an email draft in your mail app. Nothing is sent until you send that email. See our Privacy Policy.

Have photos or drawings? Send them on WhatsApp: +86 13590158756

Tell Us Your Cap and Batch Size

Send the cap, the bottle and your batch size. We reply with the unit we recommend.

Get a Quote
Benchtop semi-automatic capping machine with two motor heads and a foot pedal