Who Builds Your Wick Tabbing Machine?
Most of our core machines are made in our own factory. Your quotation names who builds this model, the version and what is tested before shipment.
Buying pre-tabbed wicks ties your wick length to a supplier. Our wick tabbing machine clamps wick to metal tabs for you: set the length with one key, and it stops with an alarm if a tab is missing.
Request a Quote

A tabbed wick is a length of wick crimped into a small metal base so it stands in the jar. The wick tabbing machine feeds tabs from a hopper, clamps each wick to a tab and drops finished wicks into a collection tray.
It is quick to set up: you enter the wick length with one key and it runs. If a tab does not arrive or the wick breaks, the machine stops with an alarm instead of producing bad wicks. Pneumatic and electric versions exist, so you can match your site.
Discuss Your ApplicationWhy candle makers bring tabbing in-house.
Most of our core machines are made in our own factory. Your quotation names who builds this model, the version and what is tested before shipment.
Change the wick length in seconds when you switch jar height.
No tab or a broken wick triggers an alarm and stops the machine, so bad wicks do not pile up.
Use the air version if you have compressed air, or the electric one if you do not.
Send a wick and a tab. We confirm the machine handles them and quote the version you need.
What the machine does. Rates, sizes and power are confirmed in your quotation.
What the machine does.
| Parameter | Detail |
|---|---|
| Function | Clamps wick to a metal tab, automatically |
| Wick length | Set with one key |
| Fault stop | Alarm and stop for no tab or broken wick |
| Drive | Pneumatic or electric version |
| Start-up | Connect power and run |
| Speed and power | Stated for your version in the quotation |
The machine has to hold your actual parts.
| Parameter | What We Check |
|---|---|
| Wick | Material, width and ply of your wick. |
| Tab | Diameter, thickness and the clamp section of your tab. |
| Length range | The shortest and the longest wick you make. |
| Feed | How the tabs are oriented in the hopper. |
A small machine needs small-machine planning.
| Parameter | What We Check |
|---|---|
| Position | The machine stands on its own cabinet on casters. Check the floor space. |
| Air | The pneumatic version needs enough air pressure and flow. |
| Power | The electric version needs a supply voltage that matches yours. |
| Operator | Plan where tabs are loaded and where wicks are collected. |
A good wick holds its tab.
| Parameter | What We Check |
|---|---|
| Clamp strength | Pull a sample of wicks and check the tab does not slip. |
| Length | Measure a sample against the setting. |
| Alignment | The tab should sit square on the wick. |
| Fault stop | Remove a tab and confirm the alarm and stop. |
We confirm speed for your wick and tab.
| Parameter | What We Check |
|---|---|
| Rate | Ask for a figure for your wick and tab; we do not publish one without a test. |
| Hopper | Ask how long it runs between tab refills. |
| Tray | Plan how often finished wicks are removed. |
In-house tabbing next to pre-tabbed wicks, hand crimping and wick inserting.
| This EquipmentWick Tabbing Machine | Pre-Tabbed Wicks | Hand Crimping | Wick Inserting | |
|---|---|---|---|---|
| What it does | Makes tabbed wicks | Supplied ready-made | Operator crimps each wick | Places finished wicks in jars |
| Length control | One-key setting | Fixed by supplier | Varies | Not applicable |
| Fault handling | Alarm stop | Supplier QC | Operator | Not applicable |
| Best for | Steady in-house volume | Low or varied volume | Very small batches | Jar line |
| Check first | Tab and wick fit | Cost and lead time | Speed and strength | Jar base |
Four places in-house tabbing fits.

Tab your own to control length and cost. Send your wick and tab so we confirm the fit.
Discuss This Application
The clamp joins wick to tab. Ask for a pull test on your parts.
Discuss This Application
Tabbed wicks feed an inserter that sets them in jars. Match tab size to your jar base.
Discuss This Application
Short wicks suit tins. Set the length with one key.
Discuss This ApplicationWhat buyers ask before they order a tabbing machine.
Write the test method, the pass criteria and what ships with the machine into the quotation.
Discuss Acceptance CriteriaWith these details we can confirm that the machine handles your wick and tab.
Have another material or format?
Share your requirements.
Send a wick, a tab and your wicks per hour.
We confirm the version: pneumatic or electric.
Agree a pull test and a fault-stop check.
Review the price, the wick tabbing machine configuration and terms.
Run the checks you agreed on the wick tabbing machine, then pack and ship.
It is joining a length of wick to a small metal base, the tab, so the wick stands upright in the jar. The tab is crimped onto the wick end.
The pneumatic version uses compressed air for the clamp; the electric one does not need air. The quotation states which fits your site.
Speed depends on wick and tab, so we do not publish a rate without a test. Send samples and your target rate.
Yes. The length is set with one key, so you can switch jar sizes in moments.
The machine stops and sounds an alarm for a missing tab or a broken wick, so you do not collect bad wicks.
Tell us the wick and the tab first. Add the rest when you have it.
Send a wick, a tab and your wicks per hour. We confirm the machine and quote the version.
Get a Quote