Who Builds Your Semi Automatic Perfume Filling Machine?
Most of our core machines are made in our own factory. We take responsibility for manufacturing, quality and delivery under the agreed order terms.
You do not need a conveyor line to fill perfume evenly. A semi automatic perfume filling machine fills to a set level while you place the bottles: 40 to 60 a minute on four heads, or 10 to 25 on one head with air only.
Request a QuoteView Photos

Semi-automatic means a person places bottles under the filling heads and removes them, while the machine controls the fill. That keeps the cost low and the changeover simple, which suits brands that run several bottle shapes in short batches.
The four-head vacuum filler fills four bottles per cycle to a fixed level. The single-head filler is a small pneumatic unit with a fill column you adjust by height; it needs no electricity, which keeps a motor out of the vapor zone. Your site still needs its own safety review for alcohol.
Discuss Your ApplicationWhy it is a sensible first machine.
Most of our core machines are made in our own factory. We take responsibility for manufacturing, quality and delivery under the agreed order terms.
Adjust the filling column and guides, and you are on a new bottle. No molds or conveyors to change.
The single-head filler runs on compressed air, so it has no motor in the vapor zone.
Add a crimper or capper next, and move up to a rotary filler later if volume rises.
Send bottles per batch and how many shapes you run. We say if a hand-loaded filler is enough.
The four-head vacuum filler and the single-head filler side by side.
Pick by volume and bottle neck.
| Parameter | 4-Head Vacuum | Single-Head |
|---|---|---|
| Fill volume | 10–500 mL | 10–300 mL |
| Bottle diameter | 7–100 mm | 6–25 mm |
| Bottle height | 50–300 mm | 50–200 mm (custom) |
| Speed | 40–60 bottles/min | 10–25 bottles/min |
| Power | 220 V / 50 Hz, 0.2 kW | Air 0.4–0.6 MPa, no electricity |
| Size (mm) | 750 × 600 × 1600 (standard), 710 × 500 × 1540 (upgraded) | 230 × 390 × 620 |
Hand loading still needs a bottle that sits true.
| Parameter | What We Check |
|---|---|
| Neck | The single-head suits necks of 6–25 mm. The vacuum filler takes bottles 7–100 mm across. |
| Base | Round, square and special bottles need a guide that holds them upright. |
| Height | The filling column has to clear the top of the bottle. |
| Volume | Level filling shows differences in inner volume. Check the tolerance you accept. |
These machines are small, so planning is quick.
| Parameter | What We Check |
|---|---|
| Space | The single-head is about 230 × 390 mm on a bench. The four-head stands on its own cabinet. |
| Utilities | The vacuum filler runs on 220 V and the single-head on compressed air. |
| Vapor | Alcohol vapor needs extraction at the filling point. |
| Spills | Plan a drip tray and a cleaning routine. |
Test with your own bottles and liquid.
| Parameter | What We Check |
|---|---|
| Level | Compare the liquid level across 50 bottles. |
| Drips | Check the neck and the outside of the bottle. |
| Operator | Have two operators fill the same batch and compare the results. |
| Records | Agree before you order whether a test video or record ships with the machine. |
The operator sets the pace.
| Parameter | What We Check |
|---|---|
| Rated speed | The four-head filler runs 40–60 a minute and the single-head 10–25. |
| Real pace | Loading and unloading often set the real pace. |
| Staffing | One person can load. A second person helps at higher speed. |
What changes as you add automation.
| This EquipmentSemi-Automatic Filler | Automatic Line | Hand Filling | Manual Crimper | |
|---|---|---|---|---|
| Fills | To a set level | To a set level, with crimping | By eye | Not applicable |
| Loading | By hand | Conveyor or by hand | By hand | By hand |
| Cost | Single machine | Machine plus line | Tools only | Single tool |
| Best for | Short batches, many shapes | Steady volume | Samples | Closing bottles |
| Check first | Bottle guide | Floor plan | Consistency | Neck size |
Four jobs for a hand-loaded filler.

Four heads fill four bottles per cycle. Send your bottle height, as the filler takes 50–300 mm.
Discuss This Application
The single-head model is compact and needs only air. Suits necks of 6–25 mm.
Discuss This Application
Round, square and special bottles all work. Plan a guide for each shape.
Discuss This Application
Pair the filler with a manual or a pneumatic crimper to close each bottle.
Discuss This ApplicationWhat buyers ask before they choose a hand-loaded filler.
Write the test liquid, the pass criteria and what ships with the machine into the quotation.
Discuss Acceptance CriteriaWith these details we can say which semi-automatic filler fits.
Have another material or format?
Share your requirements.
Send your bottles, liquid and batch size.
We recommend the four-head or the single-head filler.
Agree a fill test with two operators.
Review the price, the semi automatic perfume filling machine configuration and terms.
Run the checks you agreed on the semi automatic perfume filling machine, then pack and ship.
Answers to questions the specs do not cover.
Request a QuoteThe machine controls the fill; a person places and removes the bottles. A full line moves bottles for you.
Yes. It needs no electricity and runs on 0.4–0.6 MPa compressed air.
It depends on the operator. The machine rates are 40–60 per minute for four heads and 10–25 for one, but hand loading is usually the limit.
Yes. You can add a crimper or capper, and move to a rotary filler when volume grows.
We do not list a manual hand-pump filler. The single-head pneumatic filler is our smallest option.
Tell us the bottle and the liquid first. Add the rest when you have it.
Send the bottle, the liquid and your batch size. We reply with the semi-automatic filler we recommend.
Get a Quote