Who Builds Your L Bar Shrink Sealer?
Most of our core machines are made in our own factory. We take responsibility for manufacturing, quality and delivery under the agreed order terms.
A weak or crooked seal ruins a shrink wrap before it reaches the tunnel. Our L bar shrink wrap machine seals and cuts film around boxed goods in one stroke, on 220 V at 2.1 kW.
Request a QuoteView Photos

An L-bar sealer takes centerfolded film, lays the product inside and seals two sides at once with an L-shaped hot bar, which also cuts the film. The result is a loose, sealed sleeve ready for the tunnel.
Our L-bar sealer is made for square boxed items such as medicine, food, health products, cosmetics and media. It has constant-temperature heat sealing, high-speed film cutting and a flat finish after shrinking. It is 1740 × 1020 × 1460 mm and uses 220 V at 2.1 kW.
Discuss Your ApplicationThese four points decide whether the sealer fits.
Most of our core machines are made in our own factory. We take responsibility for manufacturing, quality and delivery under the agreed order terms.
The seal frame limits how big a pack fits. Send the dimensions of your largest pack.
A steady seal temperature gives even seals across a shift.
Fast cutting keeps the seal clean and the sealing stroke short.
Send a pack and a film. We check the frame and the seal.
The standard L-bar sealer at a glance.
One standard model.
| Parameter | L-Bar Sealer |
|---|---|
| Function | Wraps and seals shrink film; cuts the film |
| Voltage | 220 V / 50 Hz |
| Power | 2.1 kW |
| Size (L × W × H) | 1740 × 1020 × 1460 mm |
| Film | POF, PVC and similar |
| Use | Square boxed goods |
Frame size and film decide the setup.
| Parameter | What We Check |
|---|---|
| Pack | The pack must fit the seal frame with room for the film. |
| Film | POF or PVC. The film thickness sets the seal temperature. |
| Weight | Heavy packs need a sturdier conveyor under them. |
| Seal | Tell us how strong the seal must be for handling and shipping. |
A single-phase machine.
| Parameter | What We Check |
|---|---|
| Space | About 1.74 × 1.02 m plus room for the operator. |
| Power | The sealer runs on 220 V at 2.1 kW. |
| Link | Place the sealer before the tunnel. |
| Operator | Leave room for the operator to load packs. |
Seal first, then shrink.
| Parameter | What We Check |
|---|---|
| Seal | Look for a closed, even seal. |
| Cut | The cut should be straight. |
| Holes | Look for burn holes in the film. |
| Strength | Pull-test a sample of seals. |
Hand-fed sealing sets the pace.
| Parameter | What We Check |
|---|---|
| Rate | Confirmed with your pack. Do not assume the rate of the tunnel. |
| Film | A film roll change takes a few minutes. |
| Match | Seal fast enough to keep the tunnel fed. |
The L-bar sealer next to other ways to seal.
| This EquipmentL-Bar Sealer | Heated Plate Film Sealer | Flow Wrapper | Induction Sealer | |
|---|---|---|---|---|
| Seals | Film sleeve around a box | Film bags | Film pillow around items | Foil liner in a cap |
| Power | 220 V, 2.1 kW | 0–300 °C, small | 220 V, 2.8 kW | 220 V, 1.8 kW |
| Best for | Boxes | Small bags | Single items in a row | Bottles |
| Check first | Seal frame size | Film type | Product height | Liner and cap |
Four jobs for an L-bar sealer.

Boxes of medicine, food, health products, cosmetics and media.
Discuss This Application
The sealed sleeve goes straight from the sealer into the tunnel.
Discuss This Application
A heated plate sealer, 0–300 °C, closes small bags. Tell us the film.
Discuss This Application
Machines ship in wooden crates. Check your door width and forklift access.
Discuss This ApplicationWhat buyers ask before they order an L-bar sealer.
Write the test method, the pass criteria and what ships with the machine into the quotation.
Discuss Acceptance CriteriaWith these details we can check the frame and the seal.
Have another material or format?
Share your requirements.
Send a pack, a film and packs per hour.
We check the seal frame and film.
Agree a sealing test.
Review the price, the L-bar shrink sealer configuration and terms.
Run the checks you agreed on the L-bar shrink sealer, then crate and ship.
A sealer with an L-shaped hot bar that seals two sides of a film sleeve at once and cuts it.
To shrink the film, yes. The sealer only seals.
No. The sealer runs on 220 V single-phase.
POF and PVC, plus similar shrink films. Send us yours to check.
Our L-bar sealer is a floor-standing model. We do not currently list a tabletop version.
Tell us the pack and the film first. Add the rest when you have it.
Send a pack and a film. We check the frame and the seal, and reply with what we recommend.
Get a Quote