Who Builds Your Flat Surface Labeling Machine?
We make most of our core machines in our own factory, so questions about this model go to the company that builds and ships it.
Cartons, boxes and pouches need a flat labeler, not a wrap machine. Our flat surface labeling machines run 40 to 120 items a minute on a conveyor, or label curved faces on the bench.
Request a QuoteView Photos

A flat labeler applies a label to a flat face: the top of a carton, the front of a box, or a pouch. The automatic model runs items from 40 to 400 mm long and 40 to 200 mm wide on a conveyor, and handles items from 0.2 to 150 mm high.
The bench model sits on a table and labels flat, curved, round, concave or convex faces of items up to 200 mm long. It is the choice for small runs, odd shapes and prototype packaging.
Discuss Your ApplicationThese four points decide which flat labeler fits.
We make most of our core machines in our own factory, so questions about this model go to the company that builds and ships it.
The automatic model handles items from 0.2 mm (a flat pouch) to 150 mm tall. Check your tallest item.
The automatic model takes labels 6–150 mm long on a 6–130 mm backing. The bench model takes labels 15–100 mm by 15–110 mm.
Where the label goes decides the head position. Send a drawing of the position.
Send an item, a label and your daily count. We pick the model.
The automatic and bench flat labelers side by side.
Pick by volume and item.
| Parameter | Automatic Flat Labeler | Bench Flat Labeler |
|---|---|---|
| Speed | 40–120 per min | 20–30 per min |
| Placement | ±1 mm | ±0.5 mm |
| Item size | L 40–400, W 40–200, H 0.2–150 mm | L 20–200, W 20–150, T 0.2–120 mm |
| Label size | L 6–150 mm, backing 6–130 mm | L 15–100 mm, W 15–110 mm |
| Power | 220 V / 50 Hz, 2 kW | Quoted per order |
| Size and weight | 1900 × 830 × 1350 mm | 920 × 470 × 500 mm; 41 kg |
Dimensions decide the model.
| Parameter | What We Check |
|---|---|
| Item | The item must fall within the range of the model. |
| Label | The label length and width must fall within the range. |
| Position | Top, bottom or side. Send a drawing. |
| Surface | Coated or matte cardboard, film and plastic hold labels differently. |
Plan the line.
| Parameter | What We Check |
|---|---|
| Space | The automatic model is about 1.9 × 0.83 m. The bench model is about 0.92 × 0.47 m. |
| Electrical | 220 V, 50 Hz, 2 kW for the automatic model. |
| Flow | Items must arrive one at a time, lying flat. |
| Parameter | What We Check |
|---|---|
| Position | Measure the label offset on 50 items. |
| Surface | Look for wrinkles and bubbles. |
| Skew | Check that the label sits square. |
| Hold | Check the label edges after a day. |
Match the labeler to the packing line.
| Parameter | What We Check |
|---|---|
| Speed | The automatic model runs 40–120 a minute and the bench model 20–30. |
| Rolls | Larger rolls mean fewer stops. |
| Changeover | A new item size means a guide change. |
Flat labeling next to the other methods.
| This EquipmentFlat Surface Labeler | Round Bottle Labeler | Double-Sided Labeler | Hand Labeling | |
|---|---|---|---|---|
| Best for | Boxes, cartons, pouches | Round bottles | Front and back faces | Samples |
| Speed | 40–120/min | 40–70/min | 30–120/min | Slow |
| Feeding | Conveyor | Conveyor | Conveyor | By hand |
| Check first | Item height | Diameter | Face width | Consistency |
Four flat labeling jobs.

Items up to 400 mm long at up to 120 a minute.
Discuss This Application
Items down to 0.2 mm thick on the automatic model.
Discuss This Application
The bench model handles curved, concave and convex surfaces.
Discuss This Application
Place the labeler after the shrink wrapper, so the label goes on the finished pack.
Discuss This ApplicationWhat buyers ask before they order a flat labeler.
Write the test method, the placement tolerance and what ships with the machine into the quotation.
Discuss Acceptance CriteriaWith these details we can pick the right flat labeler.
Have another material or format?
Share your requirements.
Send an item, a label and items per hour.
We pick the automatic or the bench flat labeler.
Agree a labeling test on your item.
Review the price, the flat surface labeling machine configuration and terms.
Run the checks you agreed on the flat surface labeling machine, then pack and ship.
Label position is part of the setup. Send a drawing and tell us whether top, bottom or side.
The automatic model takes items from 0.2 mm high, such as a flat pouch.
The bench model labels flat, curved, round, concave and convex faces.
The automatic model places labels to ±1 mm and the bench model to ±0.5 mm.
The quotation states the air and power needs for the model you choose.
Tell us the item and the label first. Add the rest when you have it.
Send an item and a label. We reply with the labeler we recommend.
Get a Quote