Packaging
Machines

The right packaging machine depends on what you pack. A boxed item, a candle in a sleeve, small parts on a card and a bottle with a foil liner each need a different method. Find yours below, then check the sizes, power and speed.

Request a Quote
4 methodsShrink, flow, blister, induction
30–120/minFlow wrapper
5 kWBlister sealer
Horizontal flow wrapping packaging machine with an infeed conveyor and a touch screen
Pick the MethodThen the machine
Four-station rotary blister sealing machine with a round turntable and a touch screen

Packaging Machines by Packing Method

There is no single packaging machine for every product. The method comes from what you pack. A boxed item suits shrink wrapping. A bar or a candle suits flow wrapping. Small parts on a card suit blister sealing, and a bottle with a foil liner suits induction sealing.

We build one machine for each method. Compare them below, then open the one that matches your product to see its specifications and what to send for a quote.

Discuss Your Application

How to Choose a Packaging Machine

Answer these four questions to find the method.

Who Builds Your Packaging Machine?

Our own factory builds most of our core machines. Build, quality and delivery are our responsibility under the order terms.

What Are You Packing?

A box, a single item, small parts or a bottle. Each one points to a different method.

What Film or Seal Do You Use?

Shrink film, flow film, a blister and card, or a foil liner. The material decides the machine.

How Many per Minute?

Rates run from a few packs a minute to over 100, and the rate sets the size of the machine.

Not Sure Which Method?

Send a sample pack. We tell you which method we would look at first.

Packaging Machine Overview

The headline figures for each method. Each machine has its own full table of specifications.

Four Packing Methods Compared

Pick a method first, then the machine.

  • Shrink: boxes and bundles
  • Flow wrap: single items
  • Blister: cards and small parts
  • Induction: bottle liners
Get a Quote
MethodPacksPowerRate
Shrink wrappingBoxes in PVC or POF filmSealer 220 V; tunnel 380 VTunnel rated up to 30–100 packs/min
Flow wrappingSingle items in film220 V, 2.8 kW30–120 packs/min
Blister sealingPVC blister to card220 V, 5 kWTurntable 0–50 rpm
Induction sealingFoil liners in caps220 V, 1.8 kW20–40 bottles/min

Which Packing Method Fits Your Product?

The four methods side by side.

This EquipmentShrink WrappingFlow WrappingBlister SealingInduction Sealing
PacksBoxes and bundlesSingle itemsCards and small partsBottles with liners
MaterialPVC or POF filmPP, CPP, PVC and morePVC blister and cardFoil liner
Power220 V and 380 V220 V220 V220 V
Check firstPack sizeProduct heightCard sizeCap and liner

Packaging Applications

Four common packing jobs and the method for each.

View Selection Criteria
L-bar sealing machine next to a heat shrink tunnel

Wrap Boxes in Shrink Film

An L-bar sealer plus a heat tunnel wraps boxed products in shrink film.

Discuss This Application

Packaging Problems and What Decides Them

What buyers ask before they choose a method.

Wrong Method
A method that does not suit the product wastes film and time. Start from the product, not the machine.
Heat Damage
Shrink wrapping, heat sealing and induction sealing all use heat. Test heat-sensitive products before you buy.
Size Changes
Each pack size needs tooling or new settings. Tell us how many sizes you run.
Film or Card Supply
We build the machines, not the film, cards or liners. Plan where you will buy them and in what widths.
Power
The tunnel needs 380 V and the other machines 220 V. Check your supply first.

What to Check in a Sample Pack Test

  1. LookCheck that the finished pack is tight and clean.
  2. SealPull-test a sample of packs.
  3. SpeedRun at your target rate.
  4. ChangeoverTime a change to another pack size.

Agree the Pack Test Before You Order

Write the test method, the pass criteria and what ships with the machine into the quotation.

Discuss Acceptance Criteria
Sample RunYour product
Pack TestSeal, look and speed
What Ships With ItManuals and wiring diagrams

What to Send Before We Quote

With these details we can recommend a packing method.

About Your Product and Film

  • MaterialsProduct and packing material
  • ProcessWrapping or sealing
  • Pack DetailsSize, material and rate

Packs and Film to Send

  • Product SampleA real item
  • Packing MaterialFilm, card or liner
  • DimensionsLength, width and height
  • Look WantedA reference pack
  • Photos of Your Packing AreaYour current packing
  • Output GoalPacks per hour

About Your Power and Floor

  • Supply voltage and compressed air
  • Floor space
  • Ventilation

Have another material or format?
Share your requirements.

Discuss Your Setup

How to Order a Packaging Machine

  1. 1Share Details

    Send a product, the packing material and packs per hour.

  2. 2Choose the Model

    We recommend a packing method and a machine.

  3. 3Agree the Test

    Agree a pack test on your product.

  4. 4Confirm the Order

    Review the price, the packaging machine configuration and terms.

  5. 5Check and Ship

    Run the checks you agreed on the packaging machine, then crate and ship.

Packaging Machines FAQs

Answers to questions the specs do not cover.

Request a Quote
Which machine should I buy for candles?

It depends on the pack. Boxed candles suit shrink wrapping; a single candle in a sleeve suits flow wrapping. Send a sample and we tell you which.

Do you build a vacuum packer or a form-fill-seal machine?

Not at the moment. We build shrink wrapping, flow wrapping, blister and induction machines.

What is the difference between flow wrapping and shrink wrapping?

Flow wrapping seals film around an item and finishes with a fin seal. Shrink wrapping puts a loose sleeve on the pack and shrinks it tight.

Can I try my product first?

Test arrangements are agreed for each project. Send a sample and tell us what the finished pack has to look like.

Do you supply the film, cards or liners?

No. We build machines only, so you buy the film, cards and liners yourself.

How are machines shipped?

In wooden crates sized for the model. The quotation confirms the crate size and delivery terms.

Request a Quote for Packaging Machines

Tell us the product and the packing material first. Add the rest when you have it.

  • Product sample and dimensions
  • Packing material
  • Packs per hour
  • Supply voltage
  • Delivery country

Request a Quote for Your Packaging Machine

Sending opens an email draft in your mail app. Nothing is sent until you send that email. See our Privacy Policy.

Have photos or drawings? Send them on WhatsApp: +86 13590158756

Send Us a Sample Pack

Send a product and the packing material. We reply with the method we recommend.

Get a Quote
Horizontal flow wrapping machine with an infeed conveyor and a touch screen